dwatson636 Posted February 22, 2013 Share #1 Posted February 22, 2013 I have seen posts about flanders bars on the rstd. But has anyone put rsv bars on an rstd? Is it something I want to even consider? Link to comment Share on other sites More sharing options...
Rick Haywood Posted February 22, 2013 Share #2 Posted February 22, 2013 I have seen posts about flanders bars on the rstd. But has anyone put rsv bars on an rstd? Is it something I want to even consider? I just helped solodad put a set on his rstd and what little bit he has been able to ride he likes them so far Link to comment Share on other sites More sharing options...
dwatson636 Posted February 22, 2013 Author Share #3 Posted February 22, 2013 And what would the differences in the rise etc? Link to comment Share on other sites More sharing options...
Phoneman1981 Posted February 23, 2013 Share #4 Posted February 23, 2013 Hello: The norm seems to be, replace RSTD stock bars with Flanders bars and then replace standard RSV bars with RSTD bars. Just my observation. RSV bars seem narrow to me. I prefer the wider pull back bars for my RSTD. Link to comment Share on other sites More sharing options...
dwatson636 Posted February 23, 2013 Author Share #5 Posted February 23, 2013 Yea I understand, But I saw a pair of RSV bars on fleabay and I was just wondering if anyone had done that. I liked how the handle bars felt when I test rode the RSV. Not sure how they would feel on the RSTD. Link to comment Share on other sites More sharing options...
jfoster Posted February 23, 2013 Share #6 Posted February 23, 2013 There may be a clearance issue putting the RSV bars on a RSTD with the speedometer, but I'm not 100% sure on that. Previously, everyone that posted changing the bars out went with the Flanders, but I think someone stated they discontinued them. Give it some time, others will chime in with more accurate information. Link to comment Share on other sites More sharing options...
dwatson636 Posted February 23, 2013 Author Share #7 Posted February 23, 2013 I wll probably go with the Flanders, but I was just curious. Link to comment Share on other sites More sharing options...
irbk Posted February 23, 2013 Share #8 Posted February 23, 2013 There may be a clearance issue putting the RSV bars on a RSTD with the speedometer, but I'm not 100% sure on that. Previously, everyone that posted changing the bars out went with the Flanders, but I think someone stated they discontinued them. Give it some time, others will chime in with more accurate information. I just bought some about 6 months ago. I'd have to look in my old posts to find where I bought them from and if they are still in stock. If the OP wants to drop me a PM I could do that. Link to comment Share on other sites More sharing options...
irbk Posted February 23, 2013 Share #9 Posted February 23, 2013 Or I'll just look it up now because I'm a nice guy like that. Phat says they are still in stock. http://www.phatperformanceparts.com/Flanders_Handlebars_Wide_Max_Pullback_Handlebars_p/650-08783.htm These are the ones I purchased and was quite happy with. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now