seforeman Posted June 12, 2012 Share #1 Posted June 12, 2012 Does anyone know the recommended adhesive or foam tape to re-attach the side badges with? Any assistance / advise would be greatly recommended. Thanks. Stu Link to comment Share on other sites More sharing options...
bikenut Posted June 12, 2012 Share #2 Posted June 12, 2012 Any 3M double sided car tape will work. Go to a paint store for cars and they will have it. I found that the 3M worked best for me. Hope this helps:fingers-crossed-emo Link to comment Share on other sites More sharing options...
Jonesboy Posted June 12, 2012 Share #3 Posted June 12, 2012 I found 3M at WalMart...... Link to comment Share on other sites More sharing options...
09RSTD Posted June 12, 2012 Share #4 Posted June 12, 2012 3M is best stuf on the entire extended planet. I hope that you never want to get those side badges off again though. You'll be forced to grind them off with a grinder.:rotf: Link to comment Share on other sites More sharing options...
Condor Posted June 12, 2012 Share #5 Posted June 12, 2012 I'm not sure what the tape was that I used, but I did pick it up from a commercial auto paint store. I'm not worried about anything coming off..... Link to comment Share on other sites More sharing options...
bikenut Posted June 13, 2012 Share #6 Posted June 13, 2012 If anyone has to remove any badges all you need is some fish line and just pull it thru the back side of the badge like a knife. Will not hurt the paint at all. Just a little tip I used many times removing car side moldings Link to comment Share on other sites More sharing options...
seforeman Posted June 13, 2012 Author Share #7 Posted June 13, 2012 Thanks for the input, I will run out today and get some, or will find it online. Stu Link to comment Share on other sites More sharing options...
PGunn Posted June 13, 2012 Share #8 Posted June 13, 2012 I bought a roll of it at Home Depot for around $12.00 it's in the row where they have the adhesives and I found it on the floor under the shelf. They have 2 different roll sizes a 6ft I believe and a 12ft I bought the 12ft roll. The tape if you don’t know is a dark gray with a red removable backing and it is a 3M product, I have yet to find anything that comes close to this stuff when correctly applied. I’m using the stuff to hold relays, buss terminals and like in place. Make sure to pick up a spray can of wax and grease remover also it really is needed to make sure the stuff sticks. It also takes 24 hours for it to really “set” once it is stuck down. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now