Whistler Posted March 8, 2012 Share #1 Posted March 8, 2012 I,m going to get a rear light bar from diamond assy and need to know where to wire it up since I pull a trailer with my bike behind the plate is already taken.. So any idleas Link to comment Share on other sites More sharing options...
M61A1MECH Posted March 8, 2012 Share #2 Posted March 8, 2012 I pulled a wire harness from my light bar to up under the driver seat and tapped into the original main harness. My trailer harness was tapped in at the same place, it worked but there not much free wire length to work with, so I built a 6" auxillary patch harness and moved all of the T-taps to the aux harness. I can build one more of the aux harnesses before I run out of parts , see my add on the classifieds section of this site. (Shameless plug for my add ) Price is $4.50 plus shipping, if there is enough interest I will continue to build and sell the harnesses. http://www.venturerider.org/classifieds/showproduct.php?product=3961&title=auxillary-taillight-harness&cat=7 Link to comment Share on other sites More sharing options...
Sideoftheroad Posted March 8, 2012 Share #3 Posted March 8, 2012 I just used scotchlok's and tapped into the trailer wire harness Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now