farm1810 Posted August 24, 2011 Share #1 Posted August 24, 2011 There are a large number of very attractive Harley Davidson after market taillights / turn signals on the market. Is the contour of the RSTD rear fender adequate for adapting one of these sets? Does anyone have photos? Link to comment Share on other sites More sharing options...
dingy Posted August 24, 2011 Share #2 Posted August 24, 2011 There are a large number of very attractive Harley Davidson after market taillights / turn signals on the market. Is the contour of the RSTD rear fender adequate for adapting one of these sets? Does anyone have photos? You would need to ask the RSV guys for what the back end of a Harley looks like, the 1st gen guys don't have any idea what that is. Seriously though, don't have an answer for your question. Just to good to pass up. Gary Link to comment Share on other sites More sharing options...
Bubber Posted August 24, 2011 Share #3 Posted August 24, 2011 Dingy, go lay down by your bowl !!!!!! Link to comment Share on other sites More sharing options...
MasterGuns Posted August 24, 2011 Share #4 Posted August 24, 2011 You would need to ask the RSV guys for what the back end of a Harley looks like, the 1st gen guys don't have any idea what that is. Seriously though, don't have an answer for your question. Just to good to pass up. Gary Great stuff Gary; man you're brave. You are about to be bombarded. Link to comment Share on other sites More sharing options...
Yammer Dan Posted August 24, 2011 Share #5 Posted August 24, 2011 I thought the same thing but was trying to be nice tonight. If you start putting Hardley parts on there it will run like one!! Link to comment Share on other sites More sharing options...
Mikealiasmike Posted August 24, 2011 Share #6 Posted August 24, 2011 There are a large number of very attractive Harley Davidson after market taillights / turn signals on the market. Is the contour of the RSTD rear fender adequate for adapting one of these sets? Does anyone have photos? Welcome to Ventureriders, You won't find a better group of folks anywhere and well worth the 12.00 just for the information you can gain from tech support. I agree, Harley has MANY aftermarket parts that are very good looking. If I remember right, the Road Kings rear fender is somewhat close to a 2nd Gen but don't quote me on that. Been awhile since I really looked at one. Be interesting to see what you end up doing though. If you do adapt something please post pics. Would love to get an idea what it would look like. Link to comment Share on other sites More sharing options...
colmike Posted August 24, 2011 Share #7 Posted August 24, 2011 Welcome to the VentureRider site. Take a look at the Harley tail lights sold by Buckeye Performance here, http://www.buckeyeperformance.com/p23.htm. I installed these on my 2005 RSV shortly after I purchased it just over a year ago and have been very satisfied with their looks and performance. The fit was perfect, the installation easy, and my motorcycle is just a lot easier to see with the added lighting. You may also check this site, http://www.venturers.org/Tech_Library/index.php?action=article&cat_id=002002&id=183, for a good review of the installation procedure. Link to comment Share on other sites More sharing options...
milkman Posted August 24, 2011 Share #8 Posted August 24, 2011 I put them on my RSTD, they look good plus safety chrome with lights. Link to comment Share on other sites More sharing options...
farm1810 Posted August 24, 2011 Author Share #9 Posted August 24, 2011 Does anyone make something more attractive to replace the original rear turn signals without leaving open holes in the fender from the brackets? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now