SilverSoul Posted July 25, 2010 Share #1 Posted July 25, 2010 Hey all gurus out there. I was wondering if anyone could please give me the pin out for the tuner port (8-pin din) on the 1st gen amp. I'm thinking about pulling both the cassette AND the tuner and just replacing them with a standard car stereo. If you look at the electronics it doesn't seem like it would be that hard. The power/volume control for the amp and the intercom all go directly to the amp and the tuner is a separate unit that could conceivably be pulled. All I need to know is the pin out on the amp. I would end up with two volume control knobs but that won't bother me. If I get the pin out and do this mod I'll be sure to include pictures and directions on how do it for anyone else who might be interested. Link to comment Share on other sites More sharing options...
friesman Posted July 25, 2010 Share #2 Posted July 25, 2010 I know its in Here on the VR site somewhere, but a friends site is bookmarked so I will send you to Scotts delusional mechanic site. Its a lot of fun, but he does know his stuff. The link I am sending also shows how to set up an mp3 player. http://www.scienceman.com/dm/pages/gps.html Brian Link to comment Share on other sites More sharing options...
SilverSoul Posted July 25, 2010 Author Share #3 Posted July 25, 2010 Thanks for the link but he only has the pin out for the CB on the amp and not the tuner. I'll probably be using the CB pin out some time in the future too though. Link to comment Share on other sites More sharing options...
Freebird Posted July 25, 2010 Share #4 Posted July 25, 2010 I think this is the only one on this site. It is for the headsets though. http://www.venturerider.org/forum/showthread.php?t=499 Link to comment Share on other sites More sharing options...
dingy Posted July 25, 2010 Share #5 Posted July 25, 2010 I also have this one. Probably not what your after though. Gary Link to comment Share on other sites More sharing options...
SilverSoul Posted July 25, 2010 Author Share #6 Posted July 25, 2010 I'm not sure the information I'm looking for is gonna be found but it is worth checking. Link to comment Share on other sites More sharing options...
friesman Posted July 25, 2010 Share #7 Posted July 25, 2010 I do have a new Pioneer cd/mp3 with usb port and ipod port already mounted into a side panel and with the ends of bikes wires neatly cut so it should be easy to rewire it into another bike. It comes with the weatherproof cover. It is barely used, I installed it and then found that I missed the speed variable sound and the handlebar mounted mute and station change so I changed it back. If you are interested pm me and Ill send you some more info. Brian Link to comment Share on other sites More sharing options...
SilverSoul Posted July 26, 2010 Author Share #8 Posted July 26, 2010 thanks for the offer friesman1 but i'd need to get the pinout on the amp before I tore out a working system. Link to comment Share on other sites More sharing options...
mbrood Posted July 28, 2010 Share #9 Posted July 28, 2010 I've only worked out the tray interconnect for the cassette... http://www.bergall.org/temp/venture/radio%20tray.jpg Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now