Sideoftheroad Posted June 22, 2010 Share #1 Posted June 22, 2010 just wondering if anyone has info. on how the bike should be wired for a 5 wire flat plug. Left signal, Right Signal and ground are easy enough. I want to concentrate on the brown and blue wire and what they should be connected to on the bike. Just going over the wiring to make sure it was done properly from the previous owner. Link to comment Share on other sites More sharing options...
dingy Posted June 22, 2010 Share #2 Posted June 22, 2010 Attached is a schematic I did a while back for a 5 wire hookup on an RSV. It does not have wire colors on trailer portion though. The Yellow wire on the brake/tail lights is the brake circuit. The Blue wire on the brake/tail lights is the tail light circuit. Gary Link to comment Share on other sites More sharing options...
kj5ix Posted June 22, 2010 Share #3 Posted June 22, 2010 I have the wire color, and designation at the shop. I will get it and post it later this afternoon. Link to comment Share on other sites More sharing options...
kj5ix Posted June 22, 2010 Share #4 Posted June 22, 2010 This is what I have for cutting the wiring harness out, and re-wiring Tail lights for the Trikes. I will just give the Bike side. Blue = Run Black = Ground Yellow = Brake Brown = Left Turn Green = Right Turn Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now