Freebird

Hello Whistler225, Welcome to Venture Rider. Please feel free to browse around and get to know the others. If you have any questions please don't hesitate to ask. Whistler225 joined on the 06/15/2023. View Member

I can but it just doesn’t matter.

I've studied the RSV wiring diagrams till I was almost crosseyed. I had two problems that I had decided were related. First of all, the bike would not start in neutral unless the clutch was pulled it. It should start without the clutch pulled in as long as it's in neutral. The second problem was that the cruise control would not set., Now, I'm not sure if either of these problems were there when I bought the trike or not because I don't remember even using the cruise or trying to start the bike in neutral. I had it in my mind that it was a wiring problem from when the Hannigan. kit was installed because the reverse also uses the neutral switch. I tracked a LOT of wiring trying to figure that out but found no issues with the wiring., I then ordered a new ignition cut off relay. That ended up correcting the issue of the bike not starting in neutral so that was good. Cruise still wouldn't set though. The troubleshooting guiide in the manual leaves a bit to be desired as it doesn't explain the results correctly. At any rate, I finally determined that the cancel switch might be the issue. I ended up taking the switches on the brake lever apart. It appears that somebody pressed the cancel switch to hard and it had got cocked a bit sideways, not even noticeable from the outside, and it wasn'nt making up. Got it reset and put back together and SUCCESS,. Now everything it working like it should. I've spent several hours trying to figure this out. My first problem was assuming that the two issues were related.

Hello clueless, Welcome to Venture Rider. Please feel free to browse around and get to know the others. If you have any questions please don't hesitate to ask. clueless joined on the 06/12/2023. View Member

Hello Brakepad, Welcome to Venture Rider. Please feel free to browse around and get to know the others. If you have any questions please don't hesitate to ask. Brakepad joined on the 06/11/2023. View Member

Glad it all worked out., I know a number of people who have tried single carb solutions and it just didn't work out. Sounds like you found a good one,

Hello Skywarp999, Welcome to Venture Rider. Please feel free to browse around and get to know the others. If you have any questions please don't hesitate to ask. Skywarp999 joined on the 06/09/2023. View Member

Hello LEATHERMAN, Welcome to Venture Rider. Please feel free to browse around and get to know the others. If you have any questions please don't hesitate to ask. LEATHERMAN joined on the 06/08/2023. View Member

Hello midnightrun4u, Welcome to Venture Rider. Please feel free to browse around and get to know the others. If you have any questions please don't hesitate to ask. midnightrun4u joined on the 06/07/2023. View Member

Hello dabennett, Welcome to Venture Rider. Please feel free to browse around and get to know the others. If you have any questions please don't hesitate to ask. dabennett joined on the 06/07/2023. View Member

Here is a tread on how to repair it if it's leaking. Or you can contact him and he offers the service,.

If it’s just leaking oil, it can be repaired.

Beautiful bike.

Hello Brook, Welcome to Venture Rider. Please feel free to browse around and get to know the others. If you have any questions please don't hesitate to ask. Brook joined on the 06/05/2023. View Member

Hello 98Royalstar, Welcome to Venture Rider. Please feel free to browse around and get to know the others. If you have any questions please don't hesitate to ask. 98Royalstar joined on the 06/05/2023. View Member