tfair

You know I was thinking that the buttons would be the issue also, but I have checked all but the driver thumb controller. I started by completely replacing the faring display unit with another one (that should not have the same button stuck) and then by disconnecting the rear passenger unit and trying to get the channel to change, either way no response. I am thinking that the rear passenger and driver only have a search button for the radio and no presets so worst case the channel would keep changing if the other controllers had a stuck button. I will check the spikes in the dash connector with an ohm meter and see if there is any chance the contacts show a reading, I am doubt full on this as the entire tunning input unit was replaced, but hey, I have seen weirder.

I was hoping to get a confirmation here before I go buy something I don't need. When I bought my used '89 VR the radio station was stuck on 101.8. None of the controls (on top , rider thumb, or passenger) would control the station. I got a radio and plastic parts off ebay, then replaced all the parts and found the radio still stuck on the same station?????? SO.... after some looking around I have come to suspect that the Radio tuner and CB tuner are actually in the Amp and the panels on the faring are just input controllers like a keyboard. Anyone out there have any ideas on this? The COM system and CB work fine and the tape player (mostly) works, it takes a few times to get the tape to start and then to auto flip to the other side but it works. I am hoping that a replacement AMP will fix things up.