Front Brake Master Cylinder Cleaning

[Pop]

1987 VR has been sitting for a long time. I have been working on the carbs and need to fix the brakes so I can road test it. I need to clean the master cyl small holes. I would like to take the master cyl off the bike and put it in my ultra sonic cleaner. Is there a way to take the wires off so I can remove the assembly or is there another way to clean it.

Thanks!

[cimmer]

I am not sure but I think when you remove the fluid level sensor that the wires will come out with that. I have not rebuilt my master cylinders so I am not sure.  Even the service manual doesnt really explain the wires either in the master cylinders so the best bet is just to tear them down and see what you find.   here is a link to the service manual to download.. https://www.venturerider.org/manuals/1986-1993 Yamaha Venture Service Manual.pdf

Here is a link to the parts fiche that will show you the parts available from Yamaha ..  https://www.partshark.com/oemparts/a/yam/50042d37f8700209bc789f1f/front-master-cylinder-1

Good luck

Rick F.