TxVenture Posted January 10, 2008 Share #1 Posted January 10, 2008 When I had the fairing off fixing broken areas I found that the CB/Air ride panel mount system was broken. What I am trying to describe is on the underneath side of the panel there are 6 supports that the mounting screws go thru. These supports were broken or cracked and would not support the panel properly. I went to a local lumber chain store and got a 3/4" dowel rod. I then drilled a hole about 2" deep centered on the end. Then I cut 6 pieces 5/16" long. Now I had 6 individual pieces 5/16" long with a hole thru the center. The 2 that are at the rear of the panel will have to have one side trimmed off because the panel narrows at that end and 3/4" is to wide to fit. Then I used a product called Automotive Amazing Goop which can be bought at Walmart for $3 and change to glue the wood pieces to the underneath side of the panel. Don H. Link to comment Share on other sites More sharing options...
Tnventurer Posted January 11, 2008 Share #2 Posted January 11, 2008 :photographing:Hey sounds Great Don....But Need pics!....Fred Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now