mmoffitt Posted March 16, 2011 Share #1 Posted March 16, 2011 I just installed the 1.5 inch risers...I notice the rubber piece between the handle bars and the faring don't reach that high...so there's no rubber between the bars and the faring...is it necessary? And if so, where would I find some high density rubber like that to make an extension? Thanks! Mike Link to comment Share on other sites More sharing options...
SilvrT Posted March 16, 2011 Share #2 Posted March 16, 2011 I just installed the 1.5 inch risers...I notice the rubber piece between the handle bars and the faring don't reach that high...so there's no rubber between the bars and the faring...is it necessary? And if so, where would I find some high density rubber like that to make an extension? Thanks! Mike No extension needed... you can either turn them upside-down and jam them in on opposite side or do like others and add an adapter. Look in this thread to see what I'm talking about... http://www.venturerider.org/forum/showthread.php?t=57431&highlight=riser Link to comment Share on other sites More sharing options...
sarges46 Posted March 17, 2011 Share #3 Posted March 17, 2011 In my thoughts the fairing rattles too much without the rubber stopper. I put mine in upside down and wedged it in there. I tried it without and didnt like the new sounds it was making. Link to comment Share on other sites More sharing options...
rumboogy Posted March 17, 2011 Share #4 Posted March 17, 2011 Go to Autozone (or other parts store), and pick up the RUBBER SPRING STIFFENERS (under $10 for 2 of them) and then use a hack saw to make them the size you need. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now