Snarley Bill Posted January 2, 2011 Posted January 2, 2011 just got the lower end back together on the engine. billet rod, and new cam with a little more duration, and lift. next is the head. i usually port my own heads. but this time i bought a new one that is milled .100", ported and flowed, heavier springs, and a three angle valve job. i never realized there was so much available for these honda motors till i searched the net.. right now i,m up in the air on the carb. i am considering a 34 mm mikuni flat side. because the intake port is huge. i really wanted a smaller carb for lowend torque. i'm also considering roller rocker arms. only have 3 months before the arkansas spring cushman meet so i need to get my butt in gear.
Eck Posted January 2, 2011 Posted January 2, 2011 (Quote): only have 3 months before the arkansas spring cushman meet so i need to get my butt in gear. I'm gonna call Linda.............
dray Posted January 2, 2011 Posted January 2, 2011 just what kind of update has no pic's ????????????????????????????????????????
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now