Grisolm1 Posted January 5, 2010 Share #1 Posted January 5, 2010 Hope this keeps someone from getting stranded (or worse) on their 1st Gen. Check the short throttle cables - from the plastic junction box on left of the frame (where cruise cable connects) - to the carb assy. Mine pull side was frayed to within 2-3 small strands remaining where it hooks to the carbs. If it had let loose on the road it would not be a fun walk home. I only caught this Sunday during my first carb off cleaning. Fairing is removed now (was actually really easy), but I think you could inspect this in place with a flashlight. Look up between the left side intake manifolds, you may see the cable to the carb linkage coming down out of a tube, thats where it frays. I since found posted elsewhere here these tend to let go at 40-60K on 1st Gens. Mine has 61K. Had to dig to find this info, so hopefully this puts it in a more prominent place. Snow is at least good for one thing - maintenance........ Can't wait to get the old girl back on the road with her new clean carbs, Diaphraghms, valve adjust, plug wires etc. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now