lombaj2468 Posted March 26, 2009 Share #1 Posted March 26, 2009 Hello all, I purchased a Clearview windshield on ebay and installed it. The only thing I noticed is that the chrome mole (36) 4XY-28345-00-00 MOLE does not fit tightly against the shield. Has anyone installed a Clearview windshield, and is there a trick or something? Thanks, John Link to comment Share on other sites More sharing options...
RoadKill Posted March 26, 2009 Share #2 Posted March 26, 2009 Call Clearview. They are stand up folks. maybe its slightly off. Mine fit perfect, but I have heard of others who had the problem and Clearview has made it right. Link to comment Share on other sites More sharing options...
colesgrandpaw Posted March 26, 2009 Share #3 Posted March 26, 2009 I have my second clearview on that fits somewhat better than the first. I called and told them that the second sheild was a little better than the first but did not fit like i should, i was told there was nothing wrong with the sheild and thay had done all thay were going to do. All this was happened after waiting for 6 months to get the sheild because of the problem that thay were having with the bubbles in the sheild after it was formed. I had to sand some off of the edge of the molding where it hit the sheild on the outer edge. I will not recommend them to anyone. Raymond:thumbdown: Link to comment Share on other sites More sharing options...
BuddyRich Posted March 26, 2009 Share #4 Posted March 26, 2009 My molding does not fit right on a stock shield or the clearview. Has a small gap. May not be the windshield at all. Even after getting a new molding it didn't fit just right. The shape of the fairing shapes the molding somewhat. Link to comment Share on other sites More sharing options...
Tom Posted March 26, 2009 Share #5 Posted March 26, 2009 Not being there I do not know but If the clip on the moulding is broke nothing is going to be tight..I thought my clips were not broke but I looked again.. Link to comment Share on other sites More sharing options...
davecb Posted March 27, 2009 Share #6 Posted March 27, 2009 I put the Clearview on mine. After installation I noticed my chrome molding was not in place, as if the clip was broken. Not the case with mine. I took the molding back out and reinserted it, doing everything very slowly to make sure it was seated correctly. It went back together fine, and I have had no problems with it... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now