skipallyn

Thanks, yeah I did that already, I've about completely exposed the whole harness and still nothin, so idk what to do at this point, so frustrated with it, smh

Thanks for the help, as far as pinched wires I've pretty much unwrapped all the harness, and still no wires I can find, but I'm about to really get into it today so I'll get back to you and let you what I find, thanks for the quick reply, appreciate the help

How's it going, I'm new to the forum, and also the proud owner of a 06 midnight venture, 34k miles, was recently dumped, at very low speed, nothing was broken, some scratches on fairing and Crack on lower R.side fairing, aside from that it was beautiful, and ran just the same, so I bought it from a friend and was told still ran just fine, I got there put the key in, turned it on, turned the killswitch to the run position, and immediately blows the 10amp ignition fuse, changed the fuse and same thing, so opened up the switch housing and started unwrapping wiring harness, and found the KS wires, just those 2 were melted together for about 18" and that was it, can't find any other wires in the fairing, under tank and seat all the way to battery, and nothing looks bad or burnt, I'm just stumped, is there way to bypass the switch, both key and killswitch and if so how do I do it, I need to ride my new bike guys, any help on the topic would be so greatly appreciated, thanks

Thank you so much for accepting me into this forum, and the rapid response as well, I just bought 06 RSV midnight and I'm having a problem with my killswitch, I turn on the ignition and everything powers up as it should, until I turn tbe killswitch to the on position, it tbe blows my ignition 10amp fuse immediately, so I started at the switch and after exposing a good part of wiring from the kswitch to the battery, I have only found that about a ft. Of tbe 2wires from that switch were melted together, and nowhere else that I can find, so I'm really not sure what to do next, I keep thinking about bypassing the damn thing altogether at this point, I wanna go for a ride! Any help or direction would be greatly appreciated, again thanks so much and glad to be a member!!!