-
Posts
34 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Store
Posts posted by Royale Rider XVZ
-
-
ABS cement along with MEK solvent will work very well for virtually any plastic on the Venture (all the plastic is ABS).
Cracks without missing pieces can be repaired easily; the repair can be nearly invisible (if the cement and reinforcement is applied to the back side).
On your terminal panel, I notice that all the recessed mounting holes are broken. Very common, but easily repaired to better than new.
1. Shave or grind down until flush the remnants of the broken out recessed bosses.
2. Cut a few squares of 1/8" thick ABS from a sheet of ABS.
3. Bond the squares of ABS to the leveled backside of the panel with ABS cement. Bond two layers of 1/8" ABS to equal approximately 1/4" build up.
4. Using a Forstner bit sized to fit within the recess, bore down through one layer of newly applied ABS.
5. Use a twist drill of a size appropriate for the 4mm recessed hex screw and drill a through hole.
Some photos of my Terminal Panel repair:
Thank you .................
-
There is a really great group of folks who ride every weekend in the spring and summer no membership required you are welcome to join any of the scheduled rides.
Most rides can be anywhere form 4 to 8 hours on a Saturday or Sunday.
ALL bikes are welcome.
You will have a great time.
Very well organized.
-
-
If you cannot find a suitable used terminal panel or if you can't repair your existing panel, incredibly that terminal panel, pn. 59J-28221-00-00 is still available NEW on Partzilla.com !!
Only $160.
Thank you
-
Here is what I have. I'm not sure it will work for you. I thought I had the top cover and the inner "bucket" for both sides but I only have the top cover for the right side.
https://www.venturerider.org/forum/attachment.php?attachmentid=118230
https://www.venturerider.org/forum/attachment.php?attachmentid=118231
thank you for checking for me. This is my first VR that looks totally different then what i am looking for
it crack were the screws hold it to the lower fairing panel
thank you again for checking for me.
-
That is a rare item.
Finding that out ............ been looking on eBay for a year now.
Might have to use Plastex Repair Kit - Plastic/Fiberglass Repair Kit recommended by another member.
-
I might have that piece. Not sure. I know I have the CLASS module and CB, I just don't remember if I got the fairing cover with them.
I'll check when I get back in town Wednesday.
Thank you
-
-
Left hand shift or right and where in the hell do you sit?
-
-
-
Not easy to find,, but then you never know. Suggest to get some Plastifix or Plastex and you can fix that without anybody knowing that you did it. Might take a bit of practice, but once mastered it's easy enough, cheap and works good.
thanks
-
-
Been riding M/C for close to 50 years and had Harley's for 25 of those years without a Pickup Truck. Never haul a bike when you can ride.
or haul when (MY) wife wants to bring (two) large suite cases .......
-
What do Harley's and German Shepard's have in common?
(before anyone gets upset at me, it's a joke).....
(i have owned Harley's before & i like them).....
They both like to ride in the back of trucks!
-
Wife & I are going up on Wednesday.
-
Now mulligan you will have to ask the chef in the kitchen for but last I checked mulligan stew was not on the menu. As far as gimmies go my son in laws brother introduced Me to that one. When ever he got within ten feet of the hole on the green, he would say, thats a gimmie, insinuating of course that he's going to get that Putt in the hole anyway. I soon learned how that worked. But when I put the ball on the tee and before driving it, picked it up back off the tee declaring thats a gimmie. He didn't quite see it the same way as when he used it. Like as if that shot wasn,t guaranteed to be a hole-in-one the nerve of him.
:rotf::rotf::rotf::rotf::rotf::rotf::rotf:
-
Wish everyone a Happy Thanksgiving and a Merry Christmas .
-
So never having played PUTT PUTT and being designated ref. I had to search the rules. there seems to be some variation but the two sets of rules that seem to hold most consistently are the US official PUT PUTT rules and the Basic PUTT PUTT rules. Since this is all for fun I would suggest we just stick with the basics or something similar to it. Oh and steamer there does not seem to be any mention of replacing an opponents ball with a Rock in any of the rules I researched. Besides BIG TOM found out about the incentive deal I offered you and YELLED AT ME>
BASIC PUTT-PUTT MINI GOLF RULES
The OBJECT of Mini Golf is to get the ball in the hole using the LEAST amount of strokes.
DEFINITION OF A STROKE: Every time the putter touches the ball, that counts as ONE STROKE. Regardless of whether it barely rolled at all, regardless of whether you meant to do it or not … it still counts as a stroke.
If you swing and MISS entirely, we are NOT counting that as a stroke. To save face, umm … errr … we’ll call that a practice swing. (grin)
We use the HONOR SYSTEM when counting our strokes. It’s all about having fun so please don’t ruin it by cheating. Please keep track of your strokes accurately. One person in your group will be in charge of writing down the scores.
BALLS LEAVING THE PUTTING AREA: If you hit your ball too hard and it bounces OFF the putting area, you must start again from the tee. The errant shot counts as a stroke. You do NOT receive an additional penalty stroke. Your penalty is having to start from the tee again.
WHO HITS FIRST? Decide amongst your group the order on the first hole. After that, typically, the person who scored lowest on the previous hole has “Honors” (hits first). If no one scored lower on the previous hole, use the same order you used last.
WHO HITS FIRST AFTER TEEING OFF? After all have teed off, whoever is FARTHEST from the hole is the first to hit. This continues until the hole is completed.
HITTING YOUR BALL INTO ANOTHER BALL: Each of you will be issued a penny to be used as a ball marker. If you think your ball might be in the way, mark it. (replace it with the penny in the exact spot you ball sat)
The game of mini golf consists of playing a ball from the tee into the hole by a stroke or successive strokes in
accordance with the rules posted at the tournament site. This tournament will be shot gun start if we have enough
foursomes.
A. Rules of Stroke Play
1. The team who plays the 9 holes in the fewest strokes is the winner (all four team members scores will be added
together for each hole).
2. One stroke penalty if: Ball jumps fairway – play next shot from spot where ball jumped fairway. Ball is
snagged in an obstacle – free ball and play from that spot, not nearer the hole.
3. After members of party reach putting green, the one nearest the hole will putt first and continue to putt until
ball is in cup. Do not take turns on the putting greens.
B. Equipment
1. Clubs
A. All participants must use club provided. Got that @buffalobodnar
2. The Ball
A. All participants must use ball provided. (no rock substitutions steamer)
C. Player's Responsibilities
1. Players should check their score after each hole for accuracy. Scores may not be altered once the scorecard
has been turned in. Turn in one scorecard per group. Score card must be signed by team captain.
2. There will be no handicapping of scores.
3. Players should not unduly delay play.
4. The playing of practice strokes during the play of a hole or between holes is forbidden. A practice
swing is not a stroke unless the ball is hit.
5. The number of strokes a player has taken shall include penalty strokes incurred.
NO .... mulligans and gimmies?
-
Got a new member coming to the rally @ the shores next year ..WELCOME Royale Rider XVZ..Don't forget to sign up in the calendar ..
Done, looking forward. Thanks
-
-
looking forward to rally
-
don't know if i made the dead line to post
just added luggage rack to my 1986 VR 1300 we have one more long ride schedule for next week!
looking forward to the October fall ride
-
UNIVERSAL RIDERS CLUB of PITTSBURGH, INC.™
in Non-VentureRider, other clubs, public Events
Posted
Check our Rides & Events Page for upcoming ride information!
www.urcpghinc.com