ken5124
-
Posts
40 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Store
Posts posted by ken5124
-
-
-
I went to the spin on adapter as well last year.. works perfect.
- 1
-
Hi, Has anyone had what appears to be a burnt computer screen, right where the fuel guage display is ? Seems to move depending on the angle that I look at it.
Is there a solution beyond replacing ?
-
Morning all, My bike is on a diet, as i do a repaint. 86 Venture Royale
Available for reasonable prices are the radio components, complete with all wiring, the CB radio, the handlebar control, Antennae ( missing top part) and wiring, and most of the intercom cabling ( expect the one intercom cable that runs front to back.) Let me know what you need? I can send pictures if required. You pay shipping !
Ken
-
I have the CB and the cassette deck removed.. Radio still works, and no issues with the cruise. I installed a couple of 12 volt plugs in the spot the cassette was in and use the cb spot for a switch to turn on the class system when I need to use it.
Ken
-
In Canada I found them at Fortnine in Montreal so I did not have to worry about additional taxes and duty and delay at the border - they came within a week by Canada Post - no charge for the shipping and the price was fairly equivalent to US msrp converted
Thanks.. found them there !
Ken
-
Got my adapter plate and filter this week !! Seems to work great NO issues.. Thanks so much
Ken
-
Can I ask where you got the new springs from ?
Thanks
Ken
-
I bit the bullet and found and bought a new oem circuit board.. all issues with errors solved,. I definitely can not solder.
-
Thanks... will work on it again this weekend.
ken
-
Thanks... I did not notice any corrosion, but I will do that today.. then apply some dielectric grease.
ken
-
Thanks.. It seems when i move the wiring around at the wiring harness, I can get it to fire up and set the pressures.. not sure if it's the pressure on the pins, contact at the pins or a wiring issue...
Ken
-
Morning.. Does anyone have a error free Class controller assembly they would sell ? I have re-soldered but no luck.. e 1 all the time. Let me know !
Ken
-
Never mind found a post with explanations !!
Ken
-
Morning on my 86 vr , I want to remove the cassette deck but when I unplug the multi pin connector, the radio no longer functions. IS there a work around to this ?
Thanks.. Stay Safe !!
Ken
-
Thanks !!
Ken
-
Can anyone point me in the right direction? I am looking for a complete water pump rebuild kit for my 86. Want to upgrade to metal impeller as part of the rebuild.
Thanks
Ken
-
Looking for a complete working set, for left and right. Let me know if you have some
Thanks
Ken
-
Thats the one. I just cut the wires and spliced them into the stock wires.
Ken
-
MY 86 Venture radiator fan was coming on at a hot temperature ( stock), which I think at 220 F was too high. I got the Napa part FS-147 and installed on the weekend. Now it comes on a lot earlier.. I like it.
Just a note if you do this .. the o ring that comes with the new thermo switch does not work.. It kept squishing out when i tightened. I carefully removed the o rink seal off the old, stock thermo switch and used it and no leaks.
Bike, while moving, keeps temp guage at just under 1/3.. prior to this change, stopped in traffic, gauge would climb to just over 2/3 before fan would come on.. Now it engages just over 1/2
FYI
ken
-
-
thanks for your input.. but how long is a normal grip for this bike.. ? I have read that goldwing grips are the right ones as well.. Anyone else ??
Ken
-
Looking for some help.. Kuryaken said their Universal Thresher Grips would work on my 1986 Venture Royale, 7/8 inch size.. Part Number 5950. I got them today but they seem to be almost 1 inch too short at 5 inches in length.. My throttle sleeve on the bike appears to be just about 6 inches.
Anyone encountered the same or have a solution or alternative>?
Thanks
ken
-
Thanks Casey.. Lower bearing is now reinstalled, let the fun begin! The top bearing was quite notchy, so there should be a big improvement.. doing the front wheel bearings as well while it is apart.
1990 tci not working
in Venture and Venture Royale Tech Talk ('83 - '93)
Posted
Ignitech.. works great