Jump to content

Krewl

Expired Membership
  • Posts

    6
  • Joined

  • Last visited

Everything posted by Krewl

  1. Perhaps here as well https://www.fastenal.com/products/details/0162564
  2. Well, keep us informed! Very excited to see the fairing mounted and read about how hard or easy the process was for you to get it mounted. Tood R.
  3. I do know where the wires are and how they run from under the drivers seat, under the rear fender and tie to the brake light. I was inquiring on how to run the trunk wires in order to access the brake/running/turning wires. I figured, after pulling the passenger seat and looking, that I will have to run the wire in the passenger seat and then under drivers seat and tie in under the drivers seat. I think I am going to order the Aux Light Harness in from M61A1MECHto make things Easier(?)/neater. I suppose I am looking for confirmation or suggestions if there is a better way to do this. Thanks again, Todd R.
  4. [TABLE=class: df-msginner] [TR] [TD][/TD] [/TR] [TR] [TD=class: msgtxt]Well, I ordered, received and installed a trunk for my 2007 RSTD. It came with lights for running and braking. Problem is I am lost as to what to do next. How to I access the running/brake system to wire it in? Is there an access panel under the passenger seat? Do I need to drill the fender and splice in (eeek)? Or do I just run it from the trunk, under the passenger seat and then tie in under the driver seat? Appreciate any help Todd R. [/TD] [/TR] [/TABLE]
  5. Thanks guys. I appreciate the feedback and help. Got it taken care of. Todd R.
  6. I recently have begun to smell gas fumes more and experiencing increased backfire on decel. I plan on adjusting the PMS and then carb syncing. But I read that the rubber caps on the carb vacuum get old and crack causing leaks and need to be checked. These are the vacum ports used when you sync the carbs. Sure enough, large crack in one. I know I read this somewhere but cannot find it. Anyway, I think the said to pull off the cap and go to a autoparts place to looks for a replacement. Anyone have any thoughts or experience about this? Thanks in advance....again. Todd "Rip" Rippy RSTD noob
×
×
  • Create New...