wiring auxiliary lites

[adventurer 08]

Where is the best place to tap into to hook up some auxiliary lites on a sec gen? My auxiliary plug under the seat does not seem to be working for some reason, checked fuse not that. I need a place that is hot only with the key on.

[M61A1MECH]

What sort of lights are you wanting to install?

There is a connector set under the seat that connects the main harness to the fender harness for all of the rear lighting, tail, brake and turns. I make a "T" harness with break out tag wires for each function that goes in between those connectors, you can use it to wire in auxiliary lights for tail, brakes or turns or use it to connect up a trailer harness, all with out having to cut into you bike's wiring harness.

If you go to the classified section and look under member vendors you can see my add for that harness and a new light bar I sell that also offers the break out tag wire option.

Those circuits only work when the key is on.

Hope this helps.