Yammer Dan Posted March 22, 2014 Posted March 22, 2014 Reving the 2nd Gen a little in garage this evening and noticed tach wasn't working. After looking the needle had gone all the way round and came back up on wrong side of peg? I know I didn't rev it that hard!!! Any way to get it back to where it belongs??
Guest Bluestreak Posted March 24, 2014 Posted March 24, 2014 Yammer, I didn't have a Baron's tach. I think it was a Drag Specialties on another bike and mine did the same. I just replaced tach for about $35 as I saw no way in without breaking case.
Freebird Posted March 24, 2014 Posted March 24, 2014 I think that happened to that tac once before. It didn't actually go all the way around, it just slipped past the pin on the way down. I think I gently removed it and lifted it to the other side of the pin.
Freebird Posted March 24, 2014 Posted March 24, 2014 I don't remember. I just remember doing it somehow. I THINK that bezel on the front screws off though.
Yammer Dan Posted March 24, 2014 Author Posted March 24, 2014 Got it! It was tight and wasn't sure it screwed off. I put a little pressure on end of needle maybe it won't do it again. Thanks.
KIC Posted March 25, 2014 Posted March 25, 2014 Just another 2nd Gen trying to produce enough power and revs to keep up with your 1st Gens...
Yammer Dan Posted March 25, 2014 Author Posted March 25, 2014 I think being that close to "Brown Sugar" is hard on "Whats Its Names" nerves.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now