SilvrT Posted October 22, 2011 Share #1 Posted October 22, 2011 I found that the top edge of my stock windshield was right in my line of sight and I either had to stretch my neck and/or sit up straighter to look over it or slouch down a lot to look thru it. Was a real PITA so I decided to cut it down 2 inches. Here's a "blow-by-blow" pics for anyone interested in the process. http://s393.photobucket.com/albums/pp16/SilvrT/2003%20Gold%20Wing/Cutting%20Down%20the%20Windshield/ You can also refer to this thread for additional info... http://www.venturerider.org/forum/showthread.php?t=1063 Link to comment Share on other sites More sharing options...
treeman Posted October 22, 2011 Share #2 Posted October 22, 2011 I took mine off, had it marked where the cut goes. i held it buddy cut it i took 3" off . the top of shield is right under my nose , wind still goes over head & around me. Had no trouble. Link to comment Share on other sites More sharing options...
muaymendez1 Posted October 23, 2011 Share #3 Posted October 23, 2011 On my 84 gl1200 I did the same and on my 83 gl1100 i desiced to cyut from the bottom and I was very happy. i cut 2 inches off the bottom , but then had to make the mounting holes in a higher position and the slots had to be made longer. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now