Top Cat
-
Posts
23 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Store
Posts posted by Top Cat
-
-
I Finley got the residue off I used a No.0000 scuffing pad and No.7 Polishing Compound and about 20Min. later with a lot of elbow grease it was gone. I applied a cote of polish and it looks like new. Thanks everyone for the help, this is a great sight. TOP CAT:cool10:
-
Yes there is a definite edge but i can not get under it with any thing.I am afraid I will scratch the finish. Top Cat
-
I don`t think so the bike looks like new it was purchased from the original owner. I do not think it has been stored outside, with only 18000 Mi. it looks like new. TOP CAT
-
I just purchased a 1999RSV with 18000 Mi. I have taken the eyebrows and the adhesive off but there is a shiney spot the size and shape of the Eyebrows it looks and feels like scotch tape it is clear and shiney. You can feel it with your finger. It will not come off. I was wondering if I should use rubbing compound on it or will that take off the clear coat or is there something else that I can use less drastic? Have any of you had this happen to you when removing your`s? Thanks for any help, TOP CAT:fingers-crossed-emo
-
Can he make them to fit a 1996 Royal Star Tour Classic???? I think they are the same for 96-2001 Royal Star`s They have a key lock behind the seat on the left side. TOP CAT:fingers-crossed-emo
-
I just got a 96 Tour Classic and it has the Chrome covers on the floorboards and the rubber strips are gone so they are very slick. I do not want to buy the replacement rubbers as they are $$$ and I like the look of the standard rubber boards. My question is how do you take the chrome covers off?? TOP CAT
-
:thumbsup2:1949 125CC Harley when I was 15 Yrs old. Lived on it all summer. That was the best summer that I can remember. Top Cat
-
Thank`s I will try that. Top Cat:fingers-crossed-emo
-
:think:I just purchased a new to me 1996 ROYAL STAR TC and would like to hard wire my ZUMO 550 . Is there any power closer than the bat. that is under the seat? Any help would be appreciated TOP CAT
-
:big-grin-emoticon:Well I finely traded the old 83 Venture off for a 1996 Royal Star Tour Classic Saturday. I hope I can get use to the wind that the faring would block. The windshield doesn't do to bad but there is a lot of wind around your legs. Also I miss the radio. Will try to get some pic. soon. Top Cat
-
This happened to me and they told me to take the battery out and reinstall it . That worked for me no problems yet. It workes OK now. TOP CAT:big-grin-emoticon:
-
I just found out from an other sight that the curb weight is 761 Lbs. Seat height is 28.4 in. And the wheel bace is 65.6 in. So it is short, low and heavy. TERRY
-
If you have floor boards there is a extension that goes on the foot peg that extendes out from under the boards so that you can catch your foot on it to lower the stand. Mine is a hollow tube with a setscrew coming out of the side where it slides over the old foot peg it slides over the peg and extendes it so you can get to it with your foot and it is chrome . I have had to tighten the setscrew a few times so that it would not fall of ,but it workes verry well. I hope that this is off some help. TOP CAT:bang head:
Last Call For Venture Patches
in Watering Hole
Posted
I will take a 53/4 patch Let me know the price and where to send the money. Terry Clark,503 Judson, Hoopeston, Illinois 60942 Tterryhclark@aol.com Top Cat:cool10: