Jump to content

Rilcoat

Expired Membership
  • Posts

    8
  • Joined

  • Last visited

Reputation

10 Good

Personal Information

  • Name
    Joe

location

  • Location
    Edmonton, AB, Canada

Converted

  • City
    Edmonton

Converted

  • State/Province
    AB

Converted

  • Home Country
    Canada

Converted

  • Bike Year and Model
    2008 rsv
  1. I just want everyone to be aware that I do not have pods. I just have K&N filters in my bike.
  2. Not sure why you think I have pods. All I have is k@n air filters in the housing
  3. I took it out for a while tonight. It has no issues on acceleration or cruising at city or highway speeds. Seems everytime I came to a stop the idle was increased a bit and I still had the puff puff puff through the exhaust. Does it through both pipes. Lets just say it idles poorly. No backfiring on decel.
  4. I re started the bike after everything was put back together. Bike ran really nice. Idle was a little low. Once the bike reached operating temperature it was backfiring through the tail pipe non stop. I will see if the stock air filters will fit the k&n chrome covers on a venture.
  5. The air filters are clean. I just checked them. I find it hard to believe that an air filter is causing this. At idle it is constantly coughing and poping through the tail pipe. I also cant seem to get the carbs to sync. I get it synced and then the idle is out drastically. I adjust the idle and the sync goes out and the only way to stop the pop and cough is to raise the idle to 1500 rpms. Even after a small blip it seems to hold the higher rpm for a minute. If i rev real hard as soon as i let the throttle go it crackles all the way to idle
  6. i have a small problem. I never had the oem filter or housing that came with the bike.
  7. I have a 2001 venture. Stock except for k&N filters. I just Bought the bike and have no history. It has 23000 miles. At idle hot it idles a bit rough and you can hear the exhaust popping and coughing. Under load when driving it seems okay. I have checked the carb sync and it was very hard to get it close. I removed the carbs and found one diaphram was crimped a little bit. I cleaned the carbs put everything back and it still does it. Plugs are brand new. Sprayed carb cleaner around while idle and found no leaks. Don’t know where to go next.
×
×
  • Create New...