Jump to content

Bassett

Expired Membership
  • Posts

    128
  • Joined

  • Last visited

Everything posted by Bassett

  1. does anyone have any spare carbs for parts? My 90 degree elbow on my carb's end broke and I could use a replacement or two.
  2. That hat was the issue!!!! I took the hose off and it didn't do it anymore. I blew into the tube and it was clogged up. Wow.
  3. No I didn't use the clear tubing yet because I damaged one of the ninety degree nipples coming out of the carbs 😫
  4. There is a thread on here about setting floats at 1" measuring from the bottom of the bowl to the bottom of the float.
  5. Five miles and a week and a half. I put them on and the pigs started leaking so I sealed them then this gas started spraying.
  6. I rebuilt the carbs a week and a half ago. Set the float with the 1" rule.
  7. Could this be because of the float not working? And the fuel level maxing out ?? really could use some help!!
  8. I know it's kinda hard to see. When the bike had no fuel pressure and I turned the pump on it started peeing gas like a stream in the air! Lol now the bike has some pressure built up from the other carbs and it only trickles out of that hole. I tried posting a video but it was too large
  9. Haha. No. Don't mind that. My float valve access pugs were leaking. And I used steel stick to seal it.
  10. https://youtu.be/TO00mXgLd5YWhat's this all about?! I don't think gas is supposed to come out like that. ����
  11. thanks for that info. As of right now I do not need new switches. My bike is well... a little unorthodox. I was wondering if anyone had a source for these switches because I would like to find one rated at 180 degrees. The side note for the temp switch is because I have an aftermarket guage and I need to add an inline resistor to make the guage read accurate.
  12. Hey all, from what im understanding the fan switch for the first gen ventures in no longer available. Anyone have a solution for this? side note- anyone know the Ohms for the temp switch?
  13. . hey zag, what type of speedometer are you using?
  14. Air box(for now) and battery. Stock set up
  15. Always good advise! Is there a way to do four carbs connected with one cone filter using PVC? (i saw it in this)------ http://www.kloppenberg.us/chopper.html
×
×
  • Create New...