AAA515

sldunker: that was one of the first things I tried Update: Found the relay. It is above the vacuum cylinder behind the bikes left fairing. After testing that (passed) I went on to the self diagnosis program (turn key on, then cruise on, then start bike, kill bike with kill switch, wait ten seconds, hold cancel and then press set, res, set, res, set, res) and at first it seemed to pass, then set flickered, then set shut off, hmmm, I try again and it seems to be ok, so i try the brake lever, pedal then clutch and they make the lights go out then come back on, i try the cancel button and it stays off. I then read how to check the cancel switch continuity. It failed. So, now the question is, can I repair the cancel switch, or do i replace the entire right hand control?

My cruise won't set so I opened up my Clymer manual and it said to start by checking the continuity of the main switch and set/res buttons, they were fine. But next step is checking the cruise control relay and I can't find a 4 wire connector with the colors it says it should have! I've found the cruise control module but it doesn't have a 4 wire connector. Please help