Jester

Djh3. Been busy. The bulb is still flashing a little faster than the other side. But not fast enough to drive me nuts. Bulb is good. So I am waiting for winter and I will find a new power source for the USB port. Sent from my SM-N920V using Tapatalk

The dealership removed some light straps thar were on the bottom of the fairing. I used the power and ground wires they left behind to power the USB port. I believe the power is coming off the switch for the spot lights. After putting everything back together the right side turn signals flash faster than the left. Both front and rear bulbs are lighting up. I think I will start be disconnecting the USB. Then dig into the bulbs if needed. I hope this makes more sense. Sent from my SM-N920V using Tapatalk

So I picked this up and installed last weekend. The bike was from Wisconsin originally and some extra lights on the fairing that had to be removed for sale in Minnesota (or so I was told). Dealer cut power and ground wires and taped the off. I tied into them. The power appears to be tied to the spot light switch by the 12 volt power supply on faring. My right blinkers now flash really fast. Both front and rear bulbs are working. Thoughts? Sent from my SM-N920V using Tapatalk

Under the mirror post Sent from my SM-N920V using Tapatalk

http://uploads.tapatalk-cdn.com/20160611/b63ed25effc54aad359e0076f352109d.jpg I am wondering if any here uses this holder. Sent from my SM-N920V using Tapatalk

So I checked the connections under the fairing and everything looked good. I pulled the wires off the speakers and tested them nothing on the meter. Not sure if I had it set correctly.I ran wires from the stereo in the garage to the speaker on the bike nothing. SO I am assuming that both the front speakers blew. The magnets don't appear to be cracked that I can see, but I got no sound. I even ran the wires back to the speaker in the wall, worked fine. SO I guess I need some new speakers.

I am in the process of that now. Thanks Sent from my SM-N920V using Tapatalk

So my front speakers started cutting out. Last ride the stopped working completely. When I got home realized I only had 1 speaker in the back. Not sure when that one stopped working. Any ideas where to start looking? Sent from my SM-N920V using Tapatalk

I pulled the bolt on the caliper mount. Slid right out. Sent from my SM-N920V using Tapatalk

thanks I will try that after dinner

Installing Barron's Lowering kit. Put in the new links. working on the caliper re-locator. I can only get axle 1/2 way out. tried removing all weight and lowering it down off the jack. no difference. Had to tap it with hammer and ratchet extension to get this far. Making me nervous. Any thoughts on what I am doing wrong? Also if anyone ahs pictures of the finished product for the locators I would appreciate it. Not exactly sure what it should look like in the end.