Need carb pilot screw orings for my 1998 Vmax

[Beau-Kat]

Need carb pilot screw orings for my 1998 Vmax.

 

Screws springs and washers are fine, just need the orings.

 

Don't know if these orings are the same as on 1st or 2nd gen Ventures.

 

Anyone know of a source?

 

Don't wanna hafta buy a hundred oring kit just to get four tiny orings.

 

I read where they are 3.0mm ID x 1.0 mm thick. Does anyone know if that is right?

 

Thanks.

[MiCarl]

They aren't rocket science. They need to fit the needle snugly without being too big to fit the bore.

 

Take one of your mixture screws and washers to the auto parts store. Pick out an o-ring that is snug on the screw but not bigger OD than the washer.

 

Make sure you fish the old o-rings out before reassembly.

[Beau-Kat]

Found a source.

Thanks for your assistance.