input for aux electrical box

[speakerfritz]

decided to put together a small aux electrical box so that i can run 1 hot wire into a new bus, and then within the aux box setup all the circuts. Thinking of mounting the sealed box under the trunk next to the CB box. 1 box to remove if ever I need to go in for warranty that way no splices and tape wraps on my electrical system. The box itself will probally be one of those black plastic radio shack project boxes cut down to the thickness to match the CB box under the trunk.

 

so as I read others electrical challenges my aux box wish list starts to grow. puttting the list out there to see if anyone chimes in with other wants. box will have relays and fuses where it makes sense.

 

a. trailer isolator circut

b. circut to send charge power to aux battery on trailer

c. circut for battery teather

d. circut to send power to usb charge station to be placed in turnk or saddle bag

f. circut for rear always hot cig lighter port (which will double as a hot cig lighter port that can accept cig port to cig port battery charge cable), can power air compressor with key out to be placed in trunk or saddle bag.

g. back off circut to support under trunk led light row

h. circut to power 2nd horn

i. circut for passenger heated garment power

j. a voltage surge supressor

 

The low power inverter will be on the trailer along with the aux batter with recharge power by circut b.)