Question regarding correct turn signal base?

[roadwarrior]

I have a 2006 RSTD which is at home and I am at the beach.I want to purchase some Genisis led turn signals but do not know which base will work.Wiithout the bike I cannot take out the bulb.

1157 replaces all 1157, 1154, 1034, 2057, 2357, 2397, 3496, and 7528 bulbs

http://www.customdynamics.com/_themes/neon/neoarule.gif

http://www.customdynamics.com/Images/baz15d.jpg

Dual Intensity Offset Pins - 7225

( Used on Most New Yamaha, Honda, and Suzuki Rear Turn Signals)

http://www.customdynamics.com/Images/bau15s.jpg

Single Intensity Offset Pins - 7507

http://www.customdynamics.com/_themes/neon/neoarule.gifor

 

 

 

 

 

[roadwarrior]

Bump:crying:

[muffinman]

According to the service manual it take a 2 prong bulb most likely an 1157 type bulb

Ask the dealer you pln on getting the leds from if they will fail after long periods of time when being used I have seen some of them the went out after sitting in traffic

Jeff

[Leland]

I have a 2006 RSTD which is at home and I am at the beach.I want to purchase some Genisis led turn signals but do not know which base will work.Wiithout the bike I cannot take out the bulb.

1157 replaces all 1157, 1154, 1034, 2057, 2357, 2397, 3496, and 7528 bulbs

http://www.customdynamics.com/_themes/neon/neoarule.gif

http://www.customdynamics.com/Images/baz15d.jpg

Dual Intensity Offset Pins - 7225

 

 

 

( Used on Most New Yamaha, Honda, and Suzuki Rear Turn Signals)

http://www.customdynamics.com/Images/bau15s.jpg

Single Intensity Offset Pins - 7507

http://www.customdynamics.com/_themes/neon/neoarule.gifor

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OK, I pulled the bulbs out of my '06 RSTD. The single contact for the rear looks like it should fit. The front dual contact bulb has three side indexing pins. Looking at your top picture, there should be one more indexing pin at approx. 11 O'clock.

[KiteSquid]

for an alternative read THIS thread

[roadwarrior]

Thanks all ! That gave me what I needed to know.I will let everyone know how it works.