luvmy40 Posted July 19, 2019 Share #1 Posted July 19, 2019 I picked up a WOLO Bad Boy horn and relay for the '86 today. Has anyone mounted one on a Gen 1? If so where did you place it? I'm thinking I'll just fab up a mounting bracket that runs straight back from the OEM mounting point and mount the WOLO unit in the recess of the lower fairing next to Cyl. 4 Link to comment Share on other sites More sharing options...
MiCarl Posted July 20, 2019 Share #2 Posted July 20, 2019 I made a bracket that mounted to the frame right where the horn does. Made it long enough to hang the horn outside the lower fairing leg. When I added combo fog/driving lights I made new brackets that carried those too. You should put a horn on each side. Really gets you noticed. Link to comment Share on other sites More sharing options...
Jayceesfolly Posted July 20, 2019 Share #3 Posted July 20, 2019 Fabricated a bracket and mounted where the original horn was mounted. Jim Link to comment Share on other sites More sharing options...
KISA Posted July 20, 2019 Share #4 Posted July 20, 2019 costs instead of the compressor))))) Link to comment Share on other sites More sharing options...
luvmy40 Posted July 20, 2019 Author Share #5 Posted July 20, 2019 costs instead of the compressor))))) These retail around $40.00 USD Link to comment Share on other sites More sharing options...
videoarizona Posted July 23, 2019 Share #6 Posted July 23, 2019 Lower right side...simple bracket...where the old original horn went on my 89. Link to comment Share on other sites More sharing options...
Flyinfool Posted July 23, 2019 Share #7 Posted July 23, 2019 I mounted my driving lights to the original horn brackets, I mounted a Bad Boy on each side to the saddlebag crash guards. I used purchased chrome handle bar mounts to make the attachment. Worked great. 2 is better than one. I started with one and then a year later I upgraded to a second one. I ran them both off the same relay so it was really easy to add the second one. If I had not sold the bike I was going to upgrade to train horns, a tank and a compressor running at 200 PSI. Link to comment Share on other sites More sharing options...
jdbaker.vet Posted October 9, 2019 Share #8 Posted October 9, 2019 Relay? Do I need to get a specific relay for the Bad Boy? If so which one? Link to comment Share on other sites More sharing options...
Flyinfool Posted October 9, 2019 Share #9 Posted October 9, 2019 The relay is nothing special. the standard 30 or 40 amp accessory relay at any auto parts store will be perfect. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now