Jump to content
IGNORED

Second Gen. Heavy Duty Clutch Spring & Full Disc Upgrade Kit!


Recommended Posts

When you roll on the throttle of your Second Gen. RSV or RSTD does the

 

clutch slip? When you "briskly" go from first to second gear does your

 

clutch slip? Do you ride 2 up often? Are you trying to pull a trailer and is

 

your clutch slipping? Are you thinking about paying $300.00 plus the

 

install for a Barnett Clutch, well think again! The stock Yamaha clutch is

 

a high quality part and will last up to 100,000 miles. The problem is not

 

your clutch; It's the clutch basket diaphragm spring and that "wimpy"

 

half disc that has failed. So here's the fix! Install an aftermarket, thicker

 

clutch diaphragm spring, and full clutch disc and never worry about that

 

RSV or RSTD or RSTC clutch again! The heavy duty clutch diaphragm spring

 

puts 25% more clamping force on the clutch discs than the stock RSV

 

clutch spring. Here's my deal, you get a brand new .070” thick heavy duty

 

clutch diaphragm spring, (name brand) a new full clutch friction disc to

 

replace the half disc, and a brand new, genuine Yamaha replacement

 

clutch cover gasket, everything you need to do this install for $100.00

 

including shipping in the USA!!! I will include complete written

 

instructions, and i have a picture file that can be downloaded!

what a deal!! If you have some miles on your current set of friction discs,

 

check my other MEMBER VENDOR Classified Ads for the remaining 7 genuine Yamaha friction

 

discs for $80.00, Making this upgrade basically, a brand new, better that

 

stock clutch! This upgrade can be done in less than 2 hours, doesn't

 

require the removal of the clutch basket, can be done with a 10mm

 

and 12mm wrench and an allen wrench, and a pair of needle nosed pliers

 

and side cutters and you will loose very little engine oil! Shipping in the

 

48 states is free, outside the us is at actual cost! I accept paypal and checks!

 

Thanks for viewing my ad.

 

Earl (skydoc_17)

CLUTCH UPGRADE KIT 2G.jpg

CLUTCH SPRING THICKNESS.jpg

Edited by skydoc_17
CRAYON BROKE!
Link to post
Share on other sites
  • 8 months later...

Hi Earl, are you still offering the clutch upgrade? My clutch slips a little in 5th gear when i hammer it. The whine has gotten worse as well so i hope this might scale it back a little. i have a 2006 RSTD.

 

Thanks,

Dave

Link to post
Share on other sites
  • 3 months later...
  • 3 months later...
  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...