Jump to content
IGNORED

Tranny locked in neutrel


Recommended Posts

Rear tire went flat the other day so I put the jack underneath and Proceeded to pull the rear tire and wheel from the bike which I have done many times before as I have owned 5 different Ventures from 1963 to the current 1999. Took the 4 nuts that hold the rear drive shaft and removed it. Replaced the rear tire and reinstalled the drive shaft the same way I have always done it. Put everything back together and now the trans is locked in neutral can not shift to any other gear. Does anybody any idea what I might have done wrong and how to fix it. Any ideas would be great Thanks

Link to comment
Share on other sites

Thanks for all the tips, and yes it was a case of miss alignment of the splines. peeked thru inspect hole on top of the swing arm and used a screw driver to help hold the joint in place, then verified it was in place by turning joint with screw driver and seeing gears in rear move. Never had that much trouble with alignment before, but it is back together and running fine Thanks again to everyone

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...