jmking42 Posted December 7, 2012 Share #1 Posted December 7, 2012 Going to put grip warmers on my Venture,the kind the go under the grips.Can I reuse the stock grips and if so,How do I get them off without tearing them up?If not,what aftermarket grips work on the Venture?I'm not looking for something fancy and expensive like Kuryakyn,just a basic grip. Link to comment Share on other sites More sharing options...
Gary N. Posted December 7, 2012 Share #2 Posted December 7, 2012 To get the stock grips off without any damage just work a small screw driver around the open end enough so you can blow compressed air into the opening. That will release the glue and let you work it off. Now that works good on the left side not so sure about the throttle side as I've never tried it. I've always just replaced with after market grips and the throttle side is a bolt on. Link to comment Share on other sites More sharing options...
ragtop69gs Posted December 7, 2012 Share #3 Posted December 7, 2012 V7Goose has a post somewhere about grip heaters he made, that work much better than the grip heaters you want to use. a search should bring up his post. Link to comment Share on other sites More sharing options...
MiCarl Posted December 7, 2012 Share #4 Posted December 7, 2012 Compressed air will work on the throttle side too. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now