Rear wheels on a Hannigan RSV

[ragtop69gs]

I had a fairly long conversation with Jim Gooch of HMS today and one topic was the rear wheels, Jim stated that any 4-100 15x7 wheel with an offset between 38-40mm would be just fine on there, no worries of any tire or wheel rub. Being able to use a 38 or 40mm offset greatly increases the selection of wheels from which to choose. The larger the number the more to the inside the wheel moves.

I also asked about the rear brake line from the rear master cylinder to the T block, it is the Yahamama stock line. I am going to replace it with a braided stainless line.

 

Hope this helps some who may want to put different wheels on.