?; Just received my Clearview Shield for my 91 VR

[GolfVenture]

I'm having a challenge installing my clearview xxl tinted shield.

 

First, I come to a conclusion that I need to get all 4 longer screws. The shield thickness is much thicker than my stock shield making the stock screws too short..

 

Second the shield curve up by the mirror installation, where the screw goes in, there is a bend in the shield to match the curvature of the faring. The bend does not butt up to the curvature of the faring. When I screw the screw in with the metal washer/collar, in order to get the screw tight I'm pushing the shield bend towards the fairng until the metal washer/coller butts up to the bracket. Is the bend of the shield suppose to butt up again the faring or is it ok to just screw the screw in with the metal washer/collar tight until the metal washer/collar butts up against the bracket.

 

 

I'd appreciate talking to someone who recently installed a clearview xxl & tall shield on an MKII.

[muffinman]

Mine is like that as well gotta pull it in with the screws

[GolfVenture]

Mine is like that as well gotta pull it in with the screws

 

I'm concerned pulling it in would put too much pressure and later could cause it to crack.

[djh3]

For what you pay for them I think a phone call or e-mail to the company would be in my future. See what they say it should look like.