cabreco Posted February 27, 2012 Share #1 Posted February 27, 2012 (edited) http://www.aftermarketcyclepartsnation.com/Drag-Specialties-RECTANGULAR-TWIN-MARKER-LIGHTS-detail.htm?productId=7724779&catalogId=&searchProducts=2040-0299 Now that I have the rear light bar on the bike I was replacing the bulbs & found the one of the sidemarker crystals has stripped screws so I can't replace that bulb yet. Of course my OCD is driving me nuts that I have a side marker out (even though I don't see it while driving). I want to pick up an extra crystal (this one is also scratched) before I try to extract the screw. I have nightmares of slipping & cracking the lens while using the screw extractor. So Does anyone know who made this light bar & what should I use for keywords on Ebay when looking for a spare. ( I assume they are no longer available). I think I may have found them...Anyone else bought these? http://www.aftermarketcyclepartsnation.com/Drag-Specialties-RECTANGULAR-TWIN-MARKER-LIGHTS-detail.htm?productId=7724779&catalogId=&searchProducts=2040-0299 Edited February 27, 2012 by cabreco Link to comment Share on other sites More sharing options...
Snaggletooth Posted February 27, 2012 Share #2 Posted February 27, 2012 You're on the right track. There are still a few suppliers that carry these. They are usually listed under "Mini Barons Twin" for the small side lights it "Baron Twin" for the larger ones in the rear. Now if you're headed into the market for some chrome grills for the rear ones ....... let me know. Got a few sets of NOS ones on my rack. Link to comment Share on other sites More sharing options...
cabreco Posted February 27, 2012 Author Share #3 Posted February 27, 2012 You're on the right track. There are still a few suppliers that carry these. They are usually listed under "Mini Barons Twin" for the small side lights it "Baron Twin" for the larger ones in the rear. Now if you're headed into the market for some chrome grills for the rear ones ....... let me know. Got a few sets of NOS ones on my rack. EXCELLENT, I found them for $3 bucks each, unfortunately they have a $7 shipping fee but whatever.... I looked at the grills but opted against it. I actually like the contrast better without the grills. I'm also afraid that if I overload it with chrome, I'll look like "Superfly" driving down the road Thanks for the help! Link to comment Share on other sites More sharing options...
Marcarl Posted February 27, 2012 Share #4 Posted February 27, 2012 Check it out with Rick Butler,,, member here. Link to comment Share on other sites More sharing options...
Snaggletooth Posted February 27, 2012 Share #5 Posted February 27, 2012 I'm also afraid that if I overload it with chrome, I'll look like "Superfly" driving down the road Thanks for the help! I've been going for the "Shaft" look myself. Link to comment Share on other sites More sharing options...
jasonm. Posted February 27, 2012 Share #6 Posted February 27, 2012 FYI- I believe Drag Specialties made ALL of the Venture's chrome accessories for the 1st gens. . Generaly well made stuff. Link to comment Share on other sites More sharing options...
BOO Posted March 14, 2012 Share #7 Posted March 14, 2012 I don't know if you ended up ordering from this company or not but I just ordered some lens and it turns out the lens gets shipped from the factory. Sounds like it may take 10 days or so. Not a problem for me but I thought I would just post additional information. BOO http://www.aftermarketcyclepartsnation.com/Drag-Specialties-RECTANGULAR-TWIN-MARKER-LIGHTS-detail.htm?productId=7724779&catalogId=&searchProducts=2040-0299 Now that I have the rear light bar on the bike I was replacing the bulbs & found the one of the sidemarker crystals has stripped screws so I can't replace that bulb yet. Of course my OCD is driving me nuts that I have a side marker out (even though I don't see it while driving). I want to pick up an extra crystal (this one is also scratched) before I try to extract the screw. I have nightmares of slipping & cracking the lens while using the screw extractor. So Does anyone know who made this light bar & what should I use for keywords on Ebay when looking for a spare. ( I assume they are no longer available). I think I may have found them...Anyone else bought these? http://www.aftermarketcyclepartsnation.com/Drag-Specialties-RECTANGULAR-TWIN-MARKER-LIGHTS-detail.htm?productId=7724779&catalogId=&searchProducts=2040-0299 Link to comment Share on other sites More sharing options...
cabreco Posted March 14, 2012 Author Share #8 Posted March 14, 2012 I don't know if you ended up ordering from this company or not but I just ordered some lens and it turns out the lens gets shipped from the factory. Sounds like it may take 10 days or so. Not a problem for me but I thought I would just post additional information. BOO Yes, I got them from there. Bought all 4 side marker crystals. Actually the link for the side markers were http://www.aftermarketcyclepartsnation.com/Drag-Specialties-BARON-TWIN-AND-BARON-MINI-TWIN-MARKER-LIGHTS-detail.htm?productid=7922788 Great quality Link to comment Share on other sites More sharing options...
BOO Posted March 14, 2012 Share #9 Posted March 14, 2012 Yes, I got them from there. Bought all 4 side marker crystals. Actually the link for the side markers were http://www.aftermarketcyclepartsnation.com/Drag-Specialties-BARON-TWIN-AND-BARON-MINI-TWIN-MARKER-LIGHTS-detail.htm?productid=7922788 Great quality Very good. I have a first gen rear mud flap that has 4 of the single minis on it. The lens are faded almost clear at this point. The flap is on my 01 second gen. Glad you were able to find the lens. BOO Link to comment Share on other sites More sharing options...
barend Posted March 16, 2012 Share #10 Posted March 16, 2012 install a red LED, more light, less power and as red as you can get even with a faded lens. as far as the side marker lights, I installed some oval LED's with a chrome bezel. works and looks great. Probably got them at superbrightleds [email=http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Fspecs%2Fmoc.htm#photos]http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Fspecs%2Fmoc.htm#photos[/email] Link to comment Share on other sites More sharing options...
bikenut Posted March 16, 2012 Share #11 Posted March 16, 2012 Try here look down to see for lens , red or amber http://www.phatperformanceparts.com/ProductDetails.asp?ProductCode=BARON%2DTWIN%2DMARKER&CartID= HOPE THIS HELPS Link to comment Share on other sites More sharing options...
cabreco Posted August 3, 2013 Author Share #12 Posted August 3, 2013 OK as a followup to this old question...does anyone know what company made the running lights under the engine in the chrome air dam like the ones here. I need to find replacement light units as my frames cracked. http://images.canadianlisted.com/nlarge/3-4953495-1984-yamaha-venture-royal-1200cc-touring-nice-shape_7974178.jpg Link to comment Share on other sites More sharing options...
Prairiehammer Posted August 3, 2013 Share #13 Posted August 3, 2013 (edited) Drag Specialties. Here is an original VentureLine Installation Instructions with part numbers. The part numbers don't seem to be Yamaha numbers. Perhaps they are Drag Specialties numbers? Edited August 3, 2013 by Prairiehammer Link to comment Share on other sites More sharing options...
Snaggletooth Posted August 3, 2013 Share #14 Posted August 3, 2013 I thought somebody found out the mini barons fit in there a while back. Not sure. Been several conversations on those. From my Droid wherever I may happen to be at any given moment. Link to comment Share on other sites More sharing options...
cabreco Posted August 3, 2013 Author Share #15 Posted August 3, 2013 I thought somebody found out the mini barons fit in there a while back. Not sure. Been several conversations on those. From my Droid wherever I may happen to be at any given moment. No, I don't need the crystals (you're right I replaced them with amber mini barons, I need to find the complete light assemblies. The frames on my lights have cracked from age & broken away. Link to comment Share on other sites More sharing options...
Karaboo Posted August 3, 2013 Share #16 Posted August 3, 2013 For LED bulbs, you can pick them up at O'Reilly's. I replaced all 22 of my red ones and the 6 amber ones in my front markers. Link to comment Share on other sites More sharing options...
cabreco Posted August 3, 2013 Author Share #17 Posted August 3, 2013 Drag Specialties. Here is an original VentureLine Installation Instructions with part numbers. The part numbers don't seem to be Yamaha numbers. Perhaps they are Drag Specialties numbers? Kevin what is the part number on that sheet for #9 (hard to make out on the image) Thanks Link to comment Share on other sites More sharing options...
cabreco Posted August 4, 2013 Author Share #18 Posted August 4, 2013 Well, finding the original light housing is friggin IMPOSSIBLE, so I decided to "Improvise"! I took a trip to Walmart & found $6. Blazer International LED Mini Clearance Lights. http://i.walmartimages.com/i/p/00/02/88/45/02/0002884502586_180X180.jpg I put 2 in each of the openings. They are SUPER bright & they work GREAT! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now