Cassett deck elimination.....?

[fixit3546]

Does anyone have an identification diagram for the wires going to the cassette deck?

 

I want to eliminate the one on the 88 but the radio wont play without it.

 

Any ideas. seems like i have seen this in the past but i cant find it.

[dingy]

Not sure if this is what you need, but here is something.

 

Gary

[friesman]

I think Scotts info here on his website under Ipod hookups might help you out.....and give you a chuckle at the same time. Scott is our own Red Green and enjoys a life of fixing things. (he is a member here as Scotty)

 

http://www.delusional-mechanic.com/

 

Brian

[muffinman]

If you jumper pins 1 and 7 the radio will work without the casette deck I use a female flat blade connector to do this just be sure to insulate the connector so it doesnt ground out.

 

 

Jeff

[bkuhr]

Heres pics of my stock radio without cassette.

[rstacy]

This thread will help

http://www.venturerider.org/forum/showthread.php?t=44070

 

This diagram did it for me

 

http://www.raymondstacy.com/pinout.jpg

[fixit3546]

Awesome Great info and thanks!!.......

[fixit3546]

I think Scotts info here on his website under Ipod hookups might help you out.....and give you a chuckle at the same time. Scott is our own Red Green and enjoys a life of fixing things. (he is a member here as Scotty)

 

http://www.delusional-mechanic.com/

 

Brian

 

I use-to get to see Red Green down here....they kept the laughs coming.

[fixit3546]

Heres pics of my stock radio without cassette.

 

Looks good, I have already cut that piece that mounts the player off. the CDI box fits in there better with it off.

[utadventure]

I have done this mod and it works great. Something I learned by accident, if you attach an IPOD and forget the flip the switch, the sound still overrides the radio and comes out the headset.

 

Dave

[Geobob]

The switch part number in the original post is a momentary switch I don't see as being the correct one. I ordered it and now have to exchange it for the correct Mouser Electronics part number 611-7401P3YZQE. I have not completed to project yet but I did order the two Din PLUGS from digikey.com CP-1380-ND and CP-3180-ND.

 

I could not find the original post again but there was some question on the wiring. I am going with this wiring diagram. I put my trust in anyone that can build a Vmax Venture.

[Geobob]

So actually what I ordered from the other post was a 4 circuit switch and we appear to need a 5 circuit switch. That part number I don't have and I don't see on the Mouser site. Any suggestions.