Saddlebag Lid Rails

[davecb]

A great buy on ebay. A little more than the last set, but still cheap...

 

 

 

 

http://cgi.ebay.com/ebaymotors/Royal-Star-Venture-1300-Saddlebag-Lid-Guards-Trim-Rails-_W0QQcmdZViewItemQQhashZitem2c59510568QQitemZ190477043048QQptZMotorcyclesQ5fPartsQ5fAccessories

[Guest scarylarry]

Price is more but the shipping is less...Right now I'm adding a door chrome strip around the front cowls, that is a job since the cowl is so thick when comes to adding this, I got one side done and hopefully if I get to stay at home this weekend I will finish the other side...

[brewser23]

When I removed the stock trim around the gas tank I replaced it with the chrome door edging and I also added some to the saddle bag lids and the edges of the fenders, I found that if you heat the material up a bit with a hair drier it makes the stuff more pliable and the adhesive seems to stick better. Did it in 05 when the bike was new and it is still on there and looks as good as new.

[Guest scarylarry]

When I removed the stock trim around the gas tank I replaced it with the chrome door edging and I also added some to the saddle bag lids and the edges of the fenders, I found that if you heat the material up a bit with a hair drier it makes the stuff more pliable and the adhesive seems to stick better. Did it in 05 when the bike was new and it is still on there and looks as good as new.

Tank has been done and that was a breeze, that lower cowl is another story and yes I read here heating will make it easier to work with, right now about get the blow torch out.. Tnanks