Jump to content
IGNORED

1983 Radio


mbrannon64

Recommended Posts

Hello Everyone,

Just got my 1983 yamaha Venture last night.

the bike is Very clean I will post pics soon.

The Issue I need help with is the Sony radio the power is on it searches switches to all the modes but no sound. the first time I turned it on I heard the little pop on sound through the speakers but now I don't even here that . the guy I got it off of siad it worked but he never used it. it's almost like it muted but it doesn't show that on the screen. there is a scan button on the laft handle bar and it also seams to work but I don't see anything about a mute on it either. no static no sound any thoughts anyone???

 

Thanks Mike

Link to comment
Share on other sites

Hey Mike,

Without pics, we are shooting in the dark here, but here goes. If the left side panel has a lock in the upper left side on the panel, use the ignition key to remove the panel. This will expose the wiring and the back of the radio unit. If there is no lock, then remove the allen head screws holding the panel to expose the wiring. Check to be sure that the wires are not just twisted together or not connected at all. If this is not the problem and it were me, I would disconnect the speaker wires and connect a known good speaker to the speaker wires on the radio unit. If the radio is good, then check the wiring to the speakers and the speakers themselves. If the radio unit is bad, then measure the outside dimentions of the radio and purchase a new one. Perhaps one that will accept a CD or an even better unit with an IPOD connection. Keep us posted on the results and don't be afraid to ask more questions, by the way, welcome to the VR.ORG site. :thumbsup2:

Earl

Link to comment
Share on other sites

Mike,

 

First picture is of a stock radio setup.

 

Second picture is of an aftermarket unit that I added, using the panel from the stock unit.

 

This radio is from Wal-Mart. Cost $40. It has a plug in for a USB thumb drive and another for an SD memory chip. No CD built in, so it is not as deep as a radio with a CB.

 

I had a unit with a CD player in it, but it had skipping problems due to vibration & mounting position.

 

Gary

Link to comment
Share on other sites

Gary, what do you do about being caught in the rain? Is the unit weatherproof?

 

 

I have a cover that I made from a tupperware container bottom that hooks under the two metal pull handles.

 

Not real pretty, but functional.

 

There are also marine grade covers that are available on ebay. These hinge up.

 

Gary

Edited by dingy
added marine cover line
Link to comment
Share on other sites

Well got her Working. thought it was strange that everything cycled through on the radio and no sound. so I pulled the left turn signal out and spliced into the speaker wire with what I knew was a working speaker and MUSIC.

so now I need help with where to get replacements and any hints or photos on removing the old ones

 

Thanks Mike

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...