Search the Community
Showing results for tags 'stems'.
Found 4 results
-
I have a quick question about valve stems. I am going to put 90 degree valve stems on my 03 RSV. There are two sizes available 8 MM and 10 MM. I have searched the forum and found threads on valve stems and could not find the answer to my question. I did read on the forum that the front and back wheels are different as far as the the valve stem hole. True or false? I'm going to put K&L valve stems on, either part number 32-5419 10MM or part number 32-5414 8 MM. Now my question is what size is the valve stem hole, 8 or 10 MM?
-
I am going to put new 90 degree valve stems on the front and rear of my 06 midnight star venture.....Do they take a special size........And where is a good place to get them....Thanks in advance
-
I found and fixed the air leak in that new front tire. It was a valve stem. I tried tightening the two lock nuts but no luck. I had to loosen both nuts and push the stem down in the rim. Blowed out some hard white chaulky stuff may have been some form of old tire sealant. Rotated the stem about 90 degrees and retighten now that new front tire is holding pressure. OK next problem that new rear Yammer Dan and I installed last fall is leaking around it's valve stem about 2 lb a day. I'll try the same fix on it. Check those valve stems for slow leaks.
-
I ordered some tires from americanmototire.com and probably need to change the valves also. Are the valve stems universal? I want to use the 90 degree type.
