dingy Posted January 17, 2012 Share #1 Posted January 17, 2012 Will RSV front rotors bolt up to a 1st gen. front wheel ?? I need a set of 298 dia. rotors for the front wheel. Gary Link to comment Share on other sites More sharing options...
Aussie Annie Posted January 17, 2012 Share #2 Posted January 17, 2012 Not getting too much info, are ya Dingy?? Link to comment Share on other sites More sharing options...
dingy Posted January 17, 2012 Author Share #3 Posted January 17, 2012 Not getting too much info, are ya Dingy?? Sometimes ya got to let the bait soak awhile !! Gary Link to comment Share on other sites More sharing options...
friesman Posted January 17, 2012 Share #4 Posted January 17, 2012 Gary is living life on the edge so far that the rest of us aint even there yet.....we all gotta catch up..... brian Link to comment Share on other sites More sharing options...
playboy Posted January 17, 2012 Share #5 Posted January 17, 2012 If they will they will probably just slow you down oh wait a min. that's what you want.:rotf: Just trying to give you a bump Link to comment Share on other sites More sharing options...
Yammer Dan Posted January 17, 2012 Share #6 Posted January 17, 2012 If they will they will probably just slow you down oh wait a min. that's what you want.:rotf: Just trying to give you a bump :rotfl: Link to comment Share on other sites More sharing options...
bongobobny Posted January 17, 2012 Share #7 Posted January 17, 2012 Hmmm, that may be a remote chance Gary. I have a spare set of rotor covers in the shed and an old 1st gen rotor, so I could see if the bolt pattern lines up... Link to comment Share on other sites More sharing options...
Yammer Dan Posted January 17, 2012 Share #8 Posted January 17, 2012 Sometimes Gary is hard to understand. He spends all that time and effort to make it go faster. Now he is trying to slow it down??? Sorry Gary it was just there. Link to comment Share on other sites More sharing options...
ragtop69gs Posted January 17, 2012 Share #9 Posted January 17, 2012 8 replies and only 1 that remotely addresses the question OOPs make that 9 Link to comment Share on other sites More sharing options...
Pegasus1300 Posted January 17, 2012 Share #10 Posted January 17, 2012 Do a google search for BraKing or Braking and see if they still have 1st gen rotors.They used to at real good price. I do not know if the 2nd gen rotors will fit.You might call call BraKing or maybe Galfers and see if they send out the same rotor for both 1st and 2nd gens. I wish I knew more. Link to comment Share on other sites More sharing options...
dingy Posted January 17, 2012 Author Share #11 Posted January 17, 2012 Do a google search for BraKing or Braking and see if they still have 1st gen rotors.They used to at real good price. I do not know if the 2nd gen rotors will fit.You might call call BraKing or maybe Galfers and see if they send out the same rotor for both 1st and 2nd gens. I wish I knew more. This would be a non standard for the MKII 1st gens. They normally use a 282mm x 7mm wide. 1st gen MKI use a 298, but it is 8.5 mm, I think. The RSV is 298mm x 5mm. The narrower width would be helpful. Gary Link to comment Share on other sites More sharing options...
dingy Posted January 18, 2012 Author Share #12 Posted January 18, 2012 Hmmm, that may be a remote chance Gary. I have a spare set of rotor covers in the shed and an old 1st gen rotor, so I could see if the bolt pattern lines up... Would you want to part company with those rotors ?? Gary Link to comment Share on other sites More sharing options...
bongobobny Posted January 18, 2012 Share #13 Posted January 18, 2012 Uhhhh, what rotors Gary? All I have is a scored up MK1 rotor... Link to comment Share on other sites More sharing options...
dingy Posted January 18, 2012 Author Share #14 Posted January 18, 2012 Uhhhh, what rotors Gary? All I have is a scored up MK1 rotor... I misread your post and thought you had a spare set of RSV rotors. Gary Link to comment Share on other sites More sharing options...
Yammer Dan Posted January 19, 2012 Share #15 Posted January 19, 2012 This any help?? http://www.ebay.com/itm/GALFER-FT-RR-WAVE-ROTOR-YAMAHA-FJR-VENTURE-V-MAX-1100-/290659633151?hash=item43acaa07ff&item=290659633151&pt=Motorcycles_Parts_Accessories&vxp=mtr Link to comment Share on other sites More sharing options...
Prairiehammer Posted January 19, 2012 Share #16 Posted January 19, 2012 ROYAL STAR VENTURE 1988 (FRONT) I must have missed that year RSV. Link to comment Share on other sites More sharing options...
RandyR Posted January 19, 2012 Share #17 Posted January 19, 2012 I think Gary is asking if the bolt holes line up? Link to comment Share on other sites More sharing options...
bongobobny Posted January 19, 2012 Share #18 Posted January 19, 2012 Yes he is! I have a set of 2nd gen rotor covers in my shed that I'm going to match up this weekend with a 1st gen rotor also in the shed to see if the bolt pattens are the same... Link to comment Share on other sites More sharing options...
dingy Posted January 19, 2012 Author Share #19 Posted January 19, 2012 I think Gary is asking if the bolt holes line up? Yes he is! Yes I am. Need the larger rotors for my radial brake experiment. There are wave rotors on ebay, but I am not warm & fuzzy with the pad surface having those large indentations in the contact area. Would have to reduce the effectiveness of the brakes as well as cause erosion of the pad surface, IMHO. Gary Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now