Jump to content
IGNORED

1986-1993 Throttle Side Electrical Switch Disassembly and Cleaning


Recommended Posts

I am in the process of installing cruise control on my 1983 Venture Standard.

 

I have purchased almost all of the items I need to do this upgrade from ebay.

 

Prior to installing the parts, I will be disassembling the ones that I can and cleaning them.

 

I have made the following write up of the process of cleaning the throttle side switch housing that came off of a 1988 Venture. The pictures show the switch completely removed from the bike.

 

It is fairly lengthy, 41 pictures, but thorough.

 

I would recommend removing switch from bike if you perform this cleaning. There are a number of small springs and ball detents that are very easy to lose unless you have a large well lit working area.

 

If you are unable to open the PDF file, PM me with your email address and I will send it to you.

 

 

Let me know if you find this helpful, as I also have the left side controls, brake and clutch switches I can do.

 

 

Picture below is of the switch detailed in this PDF file.

 

37950.pdf

37949.jpg

 

 

Gary

Edited by Freebird
Link to comment
Share on other sites

×
×
  • Create New...