baustin Posted November 16, 2008 Share #1 Posted November 16, 2008 While waxing my new '08 Venture S, I noticed a chrome piece of metal over the top of the rear jug on the left side (sitting on bike) and there is not one on the right side. Is this piece missing and if not, what is it's purpose. The only purpose I can see is it makes it hard to get to the seat nut on that side and easy on the other. I can't sleep wondering if my baby is missing on of her chrome pieces. Link to comment Share on other sites More sharing options...
pegscraper Posted November 16, 2008 Share #2 Posted November 16, 2008 Nope. There's only one of them. The thought is that it is a splash guard to keep gas off of a hot cam cover in case some is spilled when filling the tank. My bike never had one though. Link to comment Share on other sites More sharing options...
Guest magiardino Posted November 16, 2008 Share #3 Posted November 16, 2008 Baustin, I have seen those chrome "covers" discussed on this page before. I believe they are supposed to protect the carbs so we don't spill gas on them or something like that. Plus they look pretty. Unfortunately, the back one does have to be taken off to get to the seat bolt. Mark in NY Link to comment Share on other sites More sharing options...
Guest magiardino Posted November 16, 2008 Share #4 Posted November 16, 2008 Yes, they are only on the left side, maybe because that's the way the bike tilts. I believe there are two of them on that side? Link to comment Share on other sites More sharing options...
N3FOL Posted November 16, 2008 Share #5 Posted November 16, 2008 I think I have the chrome piece on both sides on mine....will double check tomorrow. Link to comment Share on other sites More sharing options...
Squidley Posted November 16, 2008 Share #6 Posted November 16, 2008 There is only the one on the bike and it's for fuel spillage. I took mine off all of my G2's as I really didn't care for the look, rest easy your baby has all that it is supposed to come with Link to comment Share on other sites More sharing options...
RoadKill Posted November 16, 2008 Share #7 Posted November 16, 2008 I left mine on, but only use a right side seat nut. You can only see one side at a time, so I figured only I would know. Link to comment Share on other sites More sharing options...
Freebird Posted November 16, 2008 Share #8 Posted November 16, 2008 I've always planned to take them off as I really don't like the looks of it either. I've just never gotten around to it though. I've never had to remove it to get to the seat bolt though. Link to comment Share on other sites More sharing options...
SilvrT Posted November 16, 2008 Share #9 Posted November 16, 2008 Can somene post a pic of what you're talking about? I have no problem accessing the seat nuts (and I'm not talking about the ones sitting on it) ... maybe I don't have these on mine??? Link to comment Share on other sites More sharing options...
V7Goose Posted November 16, 2008 Share #10 Posted November 16, 2008 On my 05 it came installed upside-down on the right side! At least that way the back edge was turned down and did not interfere with access to the seat nut. When installed correctly on the left side, the rear edge is turned up and really interferes with easy access to the left seat nut - doesn't really block it, just a PITA. Since I like the symmetrical look, AND since I can't imagine that it has any real value even when installed correctly, I removed mine and used it as a mounting plate to install gauges and a courtesy light. Goose Link to comment Share on other sites More sharing options...
MAINEAC Posted November 16, 2008 Share #11 Posted November 16, 2008 I got a cigarette lighter attatched to mine. Link to comment Share on other sites More sharing options...
N3FOL Posted November 16, 2008 Share #12 Posted November 16, 2008 A cigarette lighter! It gets pretty hot down there my fellow rider. Try to find another place to put it. Link to comment Share on other sites More sharing options...
KeithR Posted November 16, 2008 Share #13 Posted November 16, 2008 This is from the parts catalog.....picture not exactly like on my 06 but close. Keith Link to comment Share on other sites More sharing options...
MAINEAC Posted November 16, 2008 Share #14 Posted November 16, 2008 A cigarette lighter! It gets pretty hot down there my fellow rider. Try to find another place to put it. Well there my fellow rider I've had a cigarette lighter there for 3 years. I wrapped the lighter with platic hose and hooked to the chrome bar with a hose clamp and run the wires to my auxillary fuse box... I can spark a butt anytime I want.. Link to comment Share on other sites More sharing options...
baustin Posted November 17, 2008 Author Share #15 Posted November 17, 2008 Thanks for all the replies and reassurance that all is well. I will sleep better tonight. Now if only the weather would clear up so I can hear those gears whine. I honestly don't think I have ever been more happy with a bike than this one.....so far. Everywhere I go I get compliments and usually hear that thay have never seen one of these or I didn't know Yamaha made a touring bike, etc. Link to comment Share on other sites More sharing options...
SilvrT Posted November 17, 2008 Share #16 Posted November 17, 2008 This is from the parts catalog.....picture not exactly like on my 06 but close. Keith thanks Keith... mine is on the right side and appears to be mounted properly. At least access to the seat nuts aren't restricted. Link to comment Share on other sites More sharing options...
Bones158 Posted November 17, 2008 Share #17 Posted November 17, 2008 I always thought they were heat shields. I have an 05 Midnight that I bought used and on rides the back of my left thigh was getting hot. Then I noticed that my bike did not have those shields so I ordered and installed them and now I have no problem with burning. Link to comment Share on other sites More sharing options...
N3FOL Posted November 17, 2008 Share #18 Posted November 17, 2008 Can somene post a pic of what you're talking about? I have no problem accessing the seat nuts (and I'm not talking about the ones sitting on it) ... maybe I don't have these on mine??? I think this is what we are talking about...I only have mine on the left and not on the right rear cylinder. It sure does look like a heat shield. Link to comment Share on other sites More sharing options...
SilvrT Posted November 17, 2008 Share #19 Posted November 17, 2008 I think this is what we are talking about...I only have mine on the left and not on the right rear cylinder. It sure does look like a heat shield. Mine is on the right and it's reversed ... meaning, the "upward" lip is forward and the "downward" lip is towards the seat. And, what are the chromed "U-bracket" for I wonder? Link to comment Share on other sites More sharing options...
N3FOL Posted November 17, 2008 Share #20 Posted November 17, 2008 The picture you attached is my right side...I am also wondering what that piece of metal is for. Yours sure sounds like it is reversed, but not really sure now what is the right orientation of the metal. It may have something to do on who did the assembly of the bike at the dealership. Link to comment Share on other sites More sharing options...
SilvrT Posted November 17, 2008 Share #21 Posted November 17, 2008 The picture you attached is my right side...I am also wondering what that piece of metal is for. Yours sure sounds like it is reversed, but not really sure now what is the right orientation of the metal. It may have something to do on who did the assembly of the bike at the dealership. I doubt this part is something put on at the dealership when they uncrate it. Yes, I took your pic and added the line & text... (was easier than snapping my own pic). Link to comment Share on other sites More sharing options...
Sideoftheroad Posted November 18, 2008 Share #22 Posted November 18, 2008 I am also wondering what that piece of metal is for. It's for the optional seatbelt accessory. Link to comment Share on other sites More sharing options...
SilvrT Posted November 18, 2008 Share #23 Posted November 18, 2008 It's for the optional seatbelt accessory. you mean the seat belt for strapping down those "rib jabbers" that sits behind you? :rotf: Link to comment Share on other sites More sharing options...
N3FOL Posted November 18, 2008 Share #24 Posted November 18, 2008 ...that is a good assumption. I have no real explanation, but I know it does get a little hard to reach underneathe while polishing. Link to comment Share on other sites More sharing options...
V7Goose Posted November 18, 2008 Share #25 Posted November 18, 2008 Those round loops over the rear valve covers are simply heat shields to keep the back of your hands from getting burned on the covers when taking off the seat while the engine is hot. They seem to provide very little value, but at least it is more than that stupid curved plate does. Goose Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now