Jimod Posted January 14, 2008 Share #1 Posted January 14, 2008 I've removed the instrument cluster and can't get the face off until I remove the Illumination control. Anyone know how to remove the control ? Does it just pull off or what ???? Jim O'D.. Link to comment Share on other sites More sharing options...
Neil86 Posted January 14, 2008 Share #2 Posted January 14, 2008 There is a small philips screw in the center of the knob that must be removed Jim, then the knob pulls off. Link to comment Share on other sites More sharing options...
Condor Posted January 14, 2008 Share #3 Posted January 14, 2008 There is a small philips screw in the center of the knob that must be removed Jim, then the knob pulls off. Thanks Neil. That's a great tid bit of information. I've posed this question several years ago and didn't get any responses. The problem was I couldn't see good enough to figure out what...or if anything... was down inside that hole in the knob. I had a hard time finding a phillips that would fit, and I have a lot of them. What I did find that would fit was a small slotted screwdriver with a tapered tip. With it I could get a bite on something, and unscrewed what ever is in there?? When I finally did get the screw out it was as you said. I small phillips with a lot of dirt packed in the cross hatch.. Link to comment Share on other sites More sharing options...
Neil86 Posted January 14, 2008 Share #4 Posted January 14, 2008 I find having a set of those small screwdriver kits for electronics from Radio Shack is handy. Link to comment Share on other sites More sharing options...
Condor Posted January 14, 2008 Share #5 Posted January 14, 2008 I find having a set of those small screwdriver kits for electronics from Radio Shack is handy. I've got 'm laying all over the place, but never in the right size when I need it..... Link to comment Share on other sites More sharing options...
sleepy2 Posted January 16, 2008 Share #6 Posted January 16, 2008 Thanks Jimod for posting this question and thanks Neil86 for the answer. I too have the panel off to change speedo and thought there might be a screw but couldn't see or feel what kind. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now