User Tag List

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 1 of 1

Thread: FIRST GEN. MKI (83 to 85) HEAVY DUTY CLUTCH SPRINGS UPGRADE KIT!

  1. #1
    Join Date
    Apr 2008
    Location
    Duncansville
    Posts
    2,015
    United States
    PA
    Post Thanks / Like
    Mentioned
    39 Post(s)
    Tagged
    1 Thread(s)

    Default FIRST GEN. MKI (83 to 85) HEAVY DUTY CLUTCH SPRINGS UPGRADE KIT!

    WHEN YOU ROLL ON THE THROTTLE OF YOUR FIRST GEN. MKI (1983 TO 1985) DOES THE CLUTCH

    SLIP? WHEN YOU "BRISKLY" GO FROM FIRST TO SECOND GEAR DOES YOUR CLUTCH SLIP? DO

    YOU RIDE 2 UP OFTEN? ARE YOU TRYING TO PULL A TRAILER AND IS YOUR CLUTCH

    SLIPPING? ARE YOU THINKING ABOUT PAYING $300.00 PLUS THE INSTALL FOR A BARNETT

    CLUTCH,WELL THINK AGAIN! THE STOCK YAMAHA CLUTCH IS A HIGH QUALITY UNIT AND WILL

    LAST OVER 100,000 MILES. THE PROBLEM IS NOT YOUR CLUTCH, IT'S THE 6 CLUTCH

    COMPRESSION SPRINGS THAT HAVE FAILED. SO HERE'S THEFIX! INSTALL AN AFTERMARKET,

    THICKER SET OF CLUTCH COMPRESSION SPRINGS, AND FULL CLUTCH DISC AND NEVER WORRY

    ABOUT THAT FIRST GEN. MKI CLUTCH AGAIN! THE 6 HEAVY DUTY CLUTCH COMPRESSION

    SPRINGSPUT 25% MORE CLAMPING FORCE ON THE CLUTCH DISCS THAN THE STOCK FIRST GEN.

    MKI CLUTCH SPRINGS. HERE'S MY DEAL, YOU GET A SET OF BRAND NEW HEAVY DUTY CLUTCH

    COMPRESSION SPRINGS, (NAME BRAND) A NEW FULL SIZE CLUTCH DISC TO REPLACE THE HALF

    DISC, AND A BRAND NEW, GENUINE YAMAHA REPLACEMENT CLUTCH COVER GASKET,

    EVERYTHING YOU NEED TO DO THIS INSTALL FOR $80
    .00 INCLUDING SHIPPING IN THE USA!!!

    OUT OF THE COUNTRY BUYERS WILL PAY ACTUAL SHIPPING COSTS ONLY!


    IF YOU HAVE SOME MILES ON YOUR CURRENT SET OF FRICTION DISCS, OR THEY ARE OVER 30

    YEARS OLD, I WILL THROW IN THE REMAINING 7 GENUINE YAMAHA FRICTION DISCS FOR $
    80.00,

    MAKING THIS UPGRADE BASICALLY, A BRAND NEW, BETTER THAN STOCK CLUTCH!


    I WILL INCLUDE COMPLETE WRITTEN INSTRUCTIONS, AND I HAVE A PICTURE FILE THAT CAN BE

    DOWNLOADED! WHAT A DEAL! THIS UPGRADE CAN BE DONE IN A FEW HOURS, DOESN'T REQUIRE THE

    REMOVAL OF THE CLUTCH BASKET, CAN BE DONE WITH A 10MM AND 12MM WRENCH AN ALLEN WRENCH

    AND A PAIR OF SIDE CUTTERS AND NEEDLE NOSED PLIERS AND YOU WON'T LOOSE A BIT OF ENGINE OIL.

    YOU CAN CONTACT ME AT:
    skydoc17@gmail.com IF YOU HAVE ANY QUESTIONS. THANKS FOR VIEWING MY AD,

    EARL.
    Attached Thumbnails Attached Thumbnails MKI CLUTCH SPRING UPGRADE.jpg   CLUTCH COVER GASKET.jpg   NEW CLUTCH DISC.jpg  
    Hidden Content

    I WOULD RATHER RIDE MY BIKE TO THE LIMIT, THAN HAVE MY BIKE LIMIT MY RIDING. BUT THAT'S JUST ME.Hidden Content

Similar Threads

  1. Replies: 3
    Last Post: Yesterday, 04:02 PM
  2. Replies: 0
    Last Post: 11-10-2018, 10:35 PM
  3. Replies: 25
    Last Post: 08-30-2010, 01:51 PM
  4. clutch springs
    By dunvilsteev in forum Watering Hole
    Replies: 5
    Last Post: 05-22-2010, 11:04 PM
  5. Front Progressive springs upgrade
    By okiefirefighter in forum Venture and Venture Royale Tech Talk ('83 - '93)
    Replies: 1
    Last Post: 09-27-2008, 10:45 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •