User Tag List

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 6 of 6

Thread: 1993 venture royal pick up pulsor coil

  1. #1
    Join Date
    Jun 2019
    Location
    Inverness
    Posts
    3
    Scotland
    Hi
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default 1993 venture royal pick up pulsor coil

    HI from new member,

    Can anyone please point me in the right direction to obtain an after market pulsor pick up coil for my 1993 venture royal. I live in the Highlands of Scotland so you can imagine it's a bit like looking for a needle in a haystack. I have found some suitable for a v max which look physically similar but have a 200 kohm resistance . My workshop manual covers up to 1989 and the pick up coil ohm range is ok within 93.5 to 126.5 ohm. I believe there were ignition changes after that date, so was there a change in the spec for the pick up coil after this that would allow me to use, for example, the V max coil noted?
    I would be grateful for any help.

    Regards Chuck.


    7

  2. #2
    Join Date
    Jul 2013
    Location
    Calgary
    Posts
    867
    Canada
    AB
    Post Thanks / Like
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 1993 venture royal pick up pulsor coil

    I'll need a bit of time to do some research for, but you would be best served to say within the ohms count as that is what the control module is programmed for.

    Maybe other members will chime in with their take's, either way I'll post later tonight or early morning.
    Patch

  3. #3
    Join Date
    Apr 2014
    Location
    Wilmington, NC
    Posts
    3,278
    United States
    NC
    Post Thanks / Like
    Mentioned
    19 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 1993 venture royal pick up pulsor coil

    My manual goes up to 93 and the pickup coil info is the same as what you quoted for 86 to 93.
    2007 Yamaha Royal Star Venture 23k miles
    1989 Yamaha Venture Royale 6k miles
    1985 Kawasaki ZN700 4cyl shaft 5k miles

  4. #4
    Join Date
    Jul 2013
    Location
    Calgary
    Posts
    867
    Canada
    AB
    Post Thanks / Like
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 1993 venture royal pick up pulsor coil

    Yes I checked the 99 manual and the readings are higher I think it read 165 to 235ish... Anyhow I found these but I am skeptical as they don't list the ohm rating? Another note on these is I found them listed for 90 to 2007 for ventures and VMax which would be wrong according to my research. So I would send them a note asking for the rating before ordering...
    This site shows them listed for 90 to 93,,, Yam apparently changed things with the pickups in 1990 but to my knowledge the manual covers 86 thru 93...
    Patch
    https://www.hpi.be/item.php?item=P4901

  5. #5
    Join Date
    Jun 2019
    Location
    Inverness
    Posts
    3
    Scotland
    Hi
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 1993 venture royal pick up pulsor coil

    Quote Originally Posted by Steven G. View Post
    Yes I checked the 99 manual and the readings are higher I think it read 165 to 235ish... Anyhow I found these but I am skeptical as they don't list the ohm rating? Another note on these is I found them listed for 90 to 2007 for ventures and VMax which would be wrong according to my research. So I would send them a note asking for the rating before ordering...
    This site shows them listed for 90 to 93,,, Yam apparently changed things with the pickups in 1990 but to my knowledge the manual covers 86 thru 93...
    Patch
    https://www.hpi.be/item.php?item=P4901
    Well Patch, I greatly appreciate your help. Your lead has brought me to the " golden goose " or rather pulsor pick up ! It seems the V Max shares the same single pick up with the 93 XVZ a single pulsor pick up with higher ohm rating as opposed to the earlier model two pick up coils as depicted in the manual we have. So as they say where I come from.

    Sainte Mhath Patch ( Pronounced : Slanj- A- Va ! Patch) meaning Good health.

  6. #6
    Join Date
    Jul 2013
    Location
    Calgary
    Posts
    867
    Canada
    AB
    Post Thanks / Like
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 1993 venture royal pick up pulsor coil

    Quote Originally Posted by Chuck Morris View Post
    Well Patch, I greatly appreciate your help. Your lead has brought me to the " golden goose " or rather pulsor pick up ! It seems the V Max shares the same single pick up with the 93 XVZ a single pulsor pick up with higher ohm rating as opposed to the earlier model two pick up coils as depicted in the manual we have. So as they say where I come from.

    Sainte Mhath Patch ( Pronounced : Slanj- A- Va ! Patch) meaning Good health.

    Well Thank you Chick!
    I hope I've steered you correctly, please post a pic when you open it of the old and new installation; this will help us help others down the road as these bikes continue to mature.

    I found the confusion listed on the web with regards to the new standard of Pulsor Coil / Stator Pulsor Coil / Stator Pickup Coil to say the least confusing even for someone who he knows what they're looking for!? I had finished late wee hours degreeing a set of cams I was already mentally whooped when I lucked out tripping over Yam's change to the single coil while referencing a substitute part number, tell you all I could hardly believe it!
    I bet Keven has an addendum kicking around? (Prairiehammer)??

    Thanks for posting the issue Chuck
    Patch

Similar Threads

  1. Replies: 0
    Last Post: 11-25-2018, 12:10 AM
  2. Replies: 0
    Last Post: 07-13-2018, 11:20 AM
  3. ignitech pick up coil question
    By jdog910 in forum Venture and Venture Royale Tech Talk ('83 - '93)
    Replies: 8
    Last Post: 11-13-2015, 09:16 AM
  4. Pick up coil
    By twogan in forum Watering Hole
    Replies: 10
    Last Post: 08-15-2013, 07:50 PM
  5. Looking for pick-up coil
    By Dano in forum Venture and Venture Royale Tech Talk ('83 - '93)
    Replies: 1
    Last Post: 04-26-2009, 10:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •