YamahaLarry Posted September 10, 2018 Share #1 Posted September 10, 2018 Need to replace the hoses coming off of the carburetor joints (intake). The hose that you have to remove when doing a carb sync. It is hard for me to tell for sure in all the parts illustrations, but it appears to be part number 90445-090G9-00. Just wondering if someone can confirm before I order the part. 2009 RSV. Part #53 below from AIS parts page: Link to comment Share on other sites More sharing options...
Marcarl Posted September 10, 2018 Share #2 Posted September 10, 2018 Looks to me to be just an ordinary piece of vacuum line, nothing special I wouldn't think. Link to comment Share on other sites More sharing options...
YamahaLarry Posted September 10, 2018 Author Share #3 Posted September 10, 2018 Looks to me to be just an ordinary piece of vacuum line, nothing special I wouldn't think. Probably not, but the one on mine now was baked on pretty hard. Had to cut about 1/2" off of each one of them and took a while to clean all the stuck rubber off of the little metal tubes. So figured I would replace with hose from momma Yamaha. Link to comment Share on other sites More sharing options...
Marcarl Posted September 10, 2018 Share #4 Posted September 10, 2018 Generally there is enough length to do just as you did without any adverse effect, and unless there is a pinching possibility I would just insert a normal vacuum line. You'll pay big bucks for a OEM formed line. Link to comment Share on other sites More sharing options...
bongobobny Posted September 11, 2018 Share #5 Posted September 11, 2018 Save yourself some money and use generic rubber vacuum hose. Just remember it is METRIC size when you purchase it... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now