Search the Community
Showing results for tags 'price'.
-
Without searching through 1000's of threads, does anyone offer a good headset for a half helmet? Or even just a hand mic at a reasonable price?
-
This company is still making trike kits for the 1st Gen. I emailed them and they sent me a brochure. The price is $5995.00. Wheels and tires not included. Check out the brochure.
-
Right Hand side cover grill
Jimod posted a topic in Venture and Venture Royale Tech Talk ('83 - '93)
G'day All I'm looking for a right side cover grill. Half the louvres on mine have fallen off ! If anyone has one for sale please quote price and shipping to Australia. Thanks Jim O'D........ -
I'm looking for a metric speedo for my '86 VR..........the odometer on the last one I bought does not work. If anyone has one let me know price and shipping to Australia please. Thanks Jim O'D.........
-
Reduced the price on my 84 in the classifieds.Bike MUST go.Someone is missing out on a good bike for the price.
-
Ok, before I hit the fleaBay curcuit again I know some of you are parting out some 1st gens. I find myself in need of at least one, if not both of the jointed mounting studs that tie the signal housings to the fender stays. I don't need the entire signal body, just the long angled stud that runs through it with the rubber joint and the short stud to the stay. But if the price is right for the whole assembly that will do to. Found why mine started wiggling so bad. The rubbers joints are breaking up. Let me know, Thanks, Mike
-
what brand bi xenon for 2nd gen rsv and price paid? also is it worth it? what about a projector? brand, price how does it install?
-
I was in Costco the other day and they had a pretty nice looking motorcyle trailer. tried to look it over but they had it standing on end so I could not see the under carriage as it was against the wall. Had nice 12" tires with chrome rims. Nice finish and a fairly low profile. I did think it was a bit long but other than that it looked to be built pretty good. Price was $1400 Canadian. I think you had to buy a spare tire as that was not included. Weight was 150 lbs and cargo load was 250lbs Check out there link http://www.pod-ium.com/PODIUM-motorcycle-luggage-trailer-aluminum.html Bob:301:
-
At last after spending alot of time researching the bike, I picked up my '08 Midnight Venture today. I was a little uneasy about the purchase as here in the UK the bike isn't well known & I couldn't get other dealers to give me a valuation as it doesn't have a book price. Fortunately as the dealer I bought it from has had it for at least 3 months, I got him to drop £3k on the price - so I couldn't say no!! The wife & I did 150 miles this evening & as the miles went on, our smiles got bigger & bigger! What a fantastic bike, it just got better & better. Did country miles with loads of twisties. Really impressed with the handling & the power. I can't believe that these bikes didn't take off over here, it's a real shame we can't get them new like you can. Thanks for all the help you gave me when I asked for advise prior to my purchase, I'll post some pics tomorrow & look forward to being around here. Who needs a Hardley, when you can ride quality like this?!
-
While I was working at the Speedway this weekend I met a guy who offered me an 86 Venture that he bought from a lady whose husband died. It had sat since 1996 so he took the tank off and had it lined and installed new tires. The carbs are off and he assumes they need to be gone through. He wants to move on to another project and I can get it for a good price. I don't do carbs. I had carbs redone on the Cavalcade I flipped. Does anyone on this forum rebuild carbs and what can I expect to pay. I really don't need another project as I want to finish up my 65 F100 but this one is tempting me!!!!
-
A brief history...had a new 06 RSTD midnight for 3 yrs and got the urge to try an '07 ST1300. Which the wife stated she would not ride it...looked to Tokyo. Which led to another m/c. Looking for either a good used RSV or a HD Glide, RK, I found an '08 RK near Beaumont with 4700 miles before I could find a RSV within 200 miles for the right price. Needs some TLC from sitting up, but other than that all checks out. Still gonna hang out here, don't post to much or do any meets, but I do enjoy reading all the goings on. Yes, it does have the factory mufflers and yes I'm keeping them...I'm not into loud. [ATTACH]68736[/ATTACH]
-
Hey guys I've got my 99 RSV all apart and I am ready to get it painted. I live in Hickory NC and am looking for someone who would do a good job at a reasonable price. Any suggestions? Also, what in you opinion is a reasonable price to have all the parts painted from a RSV [front fairing, lower fairings, tank, side covers,fenders and saddlebags(not doing the tour pack)]. I want everything sanded and painted back in only one color. So a little help on pricing and any painter suggestions will be appreciated! Pics will follow afterwards.......
-
OK, we all know that all of the model year Gen2 Ventures are pretty much the same. well, I'm fixin' to buy a new ignition switch and a new factory shock. Mine have both gone almost totally, splooey. Yes, I know there are probably better aftermarket units out there (Works, Hagon) but I feel that I need the adjustability that the factory air preload shock offers, so that's what I'm buying. Partshark has the lowest price that I've found, but. I'm finding two part numbers and two different prices. The Partshark diagram shows no vent hose before 2005. Those shocks show a price of $512.84. 2005 and after show the vent hose and a price of $434.50. Now to confuse things worse, one of the years showing the older part number, more expensive shock shows the newer part number at the higher price of the older part number shock. So, the question is....is there a difference between these two shocks and/or price. I don't think there is, and I'm thinking that Partshark has just listed the new updated part number with a wrong price. Why would the older non-vented style shock (if they even make that version any longer) be more expersive than the newer vented style?
-
My local shop wants 65 labor to change the tires each for me---is that a fair price? Thanks everyone chris
-
I picked up one of these yesterday for my shed. The size is just right to keep the bike tools and "stuff" in and the price is right at $150.00.
-
Hi ... It broke this morning. Fortunately I was at home, and not 1000 miles away. Part is: 41V-26313-01-00 Cable 3, Throttle (1986 Venture Royale) If anyone has one in new or good condition and can get it in the mail in the next day or so I would be very grateful, and pay a decent price. Otherwise I will have to wait the regulation two weeks it takes any of those retailers to get one to me, because they won't drop-ship. Thanks Steve
-
I have been sanding the wheels on my 99 to begin polishing them. I still have a long way to go. I looked around at several chromers and polishers and was amazed at their quotes. One polisher, who I liked his work alot, came in at a price higher then some of the chromers. Best chrome price I can get is about 700 bucks. The polished wheels came in just over that. Guess ill just have to knuckle down and finish what I already started myself. The cost is just too prohibitive to farm it out.
-
How much would it cost for me to get 2 new seats for my 08 RSTD the stock one's that came with the bike. What would be a good price for new one's from some where? Joe
-
OK guys and Gals what model of toggs to I get ?? there are so many to chose from. togg that and toad this.. sheesh Just wanna know what most are using and the price I should be looking at. Thanks for any input. http://www.revzilla.com/motorcycle-rain-gear#v2-facets%5B%5D=72&page=1&page_size=96&sort=featured Oh and should I go with XL as I wear a large in clothes? to go over the clothes? Jeff
-
Here in Ontario Canadian Tire has Rotella T on sale for two weeks at 25% off which puts their price for a 5 gallon pail at $56.99, eh.
-
Anyone out there have a five pin headset they want to part with. I have a 2004 Venture R/S and too many helmets and not enough headsets. My newest helmet is a full face. Give me a price. Thanks.
-
Now that I have the "Taylor Trailer at Atlantic Beach, I will be riding down more often; just discovered that my cover for the bike is too small and I need one to cover the "big" bike. Any ideas where I can buy one at a reasonable price ASAP?
-
OK, I'm going to put my 2008 venture S on the market. Need a little input as to asking price. It has about 12K, new Dunlop Elite 3s last summer. Still under warranty. Has Wagner Fiberglass grill cover. Bike is in excellent shape. Thanks for the input. Steve
-
FYI Polk Audio speakers (db 401s and others) on sale at Crutchfield buy one pair...get the scond pair 1/2 price...approx $45.00 savings.:cool10: And...FREE SHIPPING! From Crutchfield's website: Double the speakers, not the price Buy one pair of Polk Audio db-series speakers or subs, and get a second pair of Polk db speakers or a Polk db sub of equal or lesser value for half price. Just add the qualifying Polk Audio gear to your cart. We'll automatically apply the 50% instant savings to the qualifying item on your order.
-
Just Ordered mine tonite. www.denniskirk.com Dennis Kirk has a great price on the Avon Venom AM41 Front 150/80H-16 $127.99 Avon Venom AM42 Rear 150/90HB-15 $110.95 Shipping is $5.00 a tire Total $248.94 Hopefully this might be a sign that spring sales are coming on tires. Everyone else was still at the $159.99 - $162.99 FRONT & $151.99 - $160.99 http://www.jakewilson.com/ http://www.motorcycle-superstore.com/ http://www.compacc.com/
.thumb.jpg.176b2ebbe9863175975d94710375c414.jpg)
.thumb.jpg.bea94b2fb3a7dc72d417d9ffb4f4fc28.jpg)
.thumb.jpg.0a6cfd8405e77fabc10f21d6e3def9cb.jpg)
