Search the Community
Showing results for tags 'head'.
-
Hi, I am stuck with an engine problem. SO the problem is i purchase a 1996 Royal Star Touring XVZ1300AT with a broken conrod thinking i'd just slot another engine in. I'm in Australia so there are not a lot of wrecked bikes for parts. Then in the USA was advertised a 1999 Royal Start Touring engine and i check the VIN suitability on eBay and went ahead and ordered it at a crazy price with freight but didn't really have an option. Then it arrived and I noticed the exhaust air injectors(maybe cap off so thats OK), but the carburetor boots are much larger on this engine so the old carby would not fit. I then asked them for the VIn it came of and it turn out int a Royal Star Venture XVZ1300TF, similar, but different!! So i thought great, I'll take the boots off the old engine and just fit them, but NO, the mounting bolts pitch is much larger on the venture engine so that wont work. I'm now stuck and my questions are : Option 1 is to get the Venture carby's but I believe that the venture carburetors end up much higher and wont fit in a Touring frame and would need to filter air box changed. Option 2 swap the heads on the engines, a pain but it solves both problems and they look like they would be able to be swapped ok so anyone whos done this I'd appreciate and advise.
-
ok so new to me bike 97 royal star ran fine during test ride no problems get it off the trailer and here we go clutch master cylinder goes out on me on my way to school make it back home somehow coolant spewing from under my seat soooooo here are the pics doesnt look like the oil so im ruling out head gasket correct? but look at my finger and the coolant tank and cap ..... is it the water pump? do replace the whole pump or just the seal? who will be the winner? thank you in advance for your help .
-
Who do I talk to about the temperature. Just so happen to need to flush my heater core today and we've got -1 for a high... So whoever you are.... Show yourself!!!! I was gonna scold old Flyinfool for the snow too but It looks like everyone's beaten me to that!
-
My sons' little dodge mini van seems to have blown a head gasket. The oil is like creamy pudding. How the heck do I clean the oil system up? I know it is going to take a couple of oil changes but should I be adding a cleaner to the oil ? This van has a 3.0 liter V-6 in it.... when I went to pick up the gasket set the guy at the parts store asked me if I wanted new Head Bolts. He said the norm is to change them when doing gaskets.... they are $165 for the set. Does anyone know if I need to? This motor has about 145,000 kilometers.... about 90,000 miles Any help would be great Kevin
-
STUPID DOCTOR!!!:bang head:
-
I have 2014 Spyder, RT. 1330 engine, cognac in color, carries 2 up with ease, goes like scart rabbit. So far so good. Now the Dutch comes out in me.... after paying all that retirement cash for original purchase I cheaped out and did not add the CB intercom for about $1500. Instead I bought a JMCB 2003 with intercom for about $400. Everything worked kind of more or less fine,, well the intercom needed new cords as well to satisfy the Edset head gear, but after that addition the only problem that continued to rear it's head was the CB part,,, I could send, but didn't receive in the headset. The set showed reception and nada in the ears,,,, thought that maybe I was slowly going deaf, but my wife informed me that was not the case,,, so I have to believe her and go with it. So I have transmission, reception, but it doesn't get to the CPU on my shoulders. I had done some cutting, eliminating and reinsertion to the headset cord and thought that maybe,,, just maybe, I had screwed something in the process. I had called JM about the problem and after going through their standard questions and answers they determined that there must be something wrong and I should send the set to them for evaluation. So I was about to embark onto that part of the process this week, when I thought..... I Know!!!! thought, why not try it once more now that I have the faring off, and I can easily plug my portable into the mix to see if it may be the antenna. Well I did, and found that everything now works perfectly,,,,huh????? no matter how I hook things up,,, everything works,,,, s t r a n g e!!!
-
Once again I find the manual lacking enough info for a lowly so-so mechanic such as myself to get a job done without help. Is there anywhere on this forum that has a good description and hopefully pictures that can take me through the dismantaling process of the front cowling so I can get to the steering head bearings which I need to change. The quick fix of tightening the steering nut was not good enough to remove looseness. Bought roller bearings from Skydoc for the job. Any help would be appreciated.
-
Calling in sick to work makes me uncomfortable. No matter how legitimate my excuse, I always get the feeling that my boss thinks I'm lying. On one recent occasion, I had a valid reason but lied anyway, because the truth was just too darned humiliating. I simply mentioned that I had sustained a head injury, and I hoped I would feel up to coming in the next day. By then, I reasoned, I could think up a doozy to explain the bandage on the top of my head. The accident occurred mainly because I had given in to my wife's wishes to adopt a cute little kitty. Initially, the new acquisition was no problem. Then one morning, I was taking my shower after breakfast when I heard my wife, Deb, call out to me from the kitchen. "Honey! The garbage disposal is dead again. Please come reset it." "You know where the button is," I protested through the shower pitter-patter and steam. "Reset it yourself!" "But I'm scared!" she persisted. "What if it starts going and sucks me in?" There was a meaningful pause and then, "C'mon, it'll only take you a second." So out I came, dripping wet and butt naked, hoping that my silent outraged nudity would make a statement about how I perceived her behavior as extremely cowardly. Sighing loudly, I squatted down and stuck my head under the sink to find the button. It is the last action I remember performing. It struck without warning, and without any respect to my circumstances. No, it wasn't the hexed disposal, drawing me into its gnashing metal teeth. It was our new kitty, who discovered the fascinating dangling objects she spied hanging between my legs. She had been poised around the corner and stalked me as I reached under the sink. And, at the precise moment when I was most vulnerable, she leapt at the toys I unwittingly offered and snagged them with her needle-like claws. I lost all rational thought to control orderly bodily movements, blindly rising at a violent rate of speed, with the full weight of a kitten hanging from my masculine region. Wild animals are sometimes faced with a "fight or flight" syndrome. Men, in this predicament, choose only the "flight" option. I know this from experience. I was fleeing straight up into the air when the sink and cabinet bluntly and forcefully impeded my ascent. The impact knocked me out cold. When I awoke, my wife and the paramedics stood over me. Now there are not many things in this life worse than finding oneself lying on the kitchen floor butt naked in front of a group of "been-there, done-that" paramedics. Even worse, having been fully briefed by my wife, the paramedics were all snorting loudly as they tried to conduct their work, all the while trying to suppress their hysterical laughter.....and not succeeding. Somehow I lived through it all. A few days later I finally made it back in to the office, where colleagues tried to coax an explanation out of me about my head injury. I kept silent, claiming it was too painful to talk about, which it was. "What's the matter?" They all asked, "Cat got your tongue?" If they only knew!
-
WELL... The world didn't end yesterday. I'm shocked and saddened because I sold everything off so I could die a wealthy man
-
Gonna give you guys the white Christmas you all want and then thats it for the ssssnnnoooow..YOUR WELCOME NORTHEAST....Bah Humbug !!!
-
All this talk about a depressed economy and yet folks are lined up two deep outside the Foot Locker store at the Sprawl of America just to get a raffle ticket to be allowed to spend $1,800.00 for a pair of Nike sneakers????????? :bang head:
-
Without going into details....... The handlebar mounted radio/CB control box got broken off. Does anyone have an extra they would consider parting with? -
Looked out the window and there is this white stuff falling from the sky......"ITS THE END OF THE WORLD I TELL YA !" ARRRRRRRRRRRRRRGH !!
-
At the risk of beating a dead horse for you members, I have a couple questions. First, does the fairing come off in one piece. I've removed the luggage, side trim, left and right tops off the upper, the lowers and the trim around the head light. I can see several mounting bolts, but can't determine if the head light as well as all the wiring and the instrument panel will stay with the bike. Not much room in there for my big hands to start undoing plugs etc. Second one concerns the replacing the collector. Do you have to drop the entire exhaust? Whats the secret hand shake for getting the two rear pipes into the top of the collector if you don't have to remove everything from the manifolds down?
-
Folks, I received an email from a new member. Username roger podoll has not posted here yet. Here is the message that he sent to me. I hope you will all keep him and his boys in your prayers. haven't had much time to check your site.My wife of 36 years was killed on oct. 27. head on collision with camper.She was on her 250 helix an I was on 650KLR.Do need prayers at this time.Have a13 an 15 year old boys at home yet.very hard on them. -
Was on trip to Myrtle Beach, had a short in the stabil horn and the radio went out? Well the head works, can change channels, bands, turn up volume, turn on and off the CB and what ever but no sound comes out of the speakers or the head sets? Have checked fuses? Any suggestions?
-
Tomorrow (Friday) morning, Barb and I are heading on another trip. First off, we'll be heading down to south of Nashville to watch our grandson quarterback his grade school football team. (ScarryLarry---it's the weekend again, and I suppose you're busy.) We'll visit there, and then Sunday afternoon head back up to near Cairo, IL and meet our friends at their house (they ride a '12 Wing). Monday morning the 4 of us will head west. We're heading to Albuquerque by Oct. 6 so we can see the start of the Balloon Fiesta, but seeing that we have some 'extra' time, we plan on heading for Colorado Springs and doing some riding in southwest Colorado. I'd like to go up on Pike's Peak, if the weather is cooperating---I've head that they have the road completely paved now. It's been at least 15 years since we've been in this area, so maybe we'll visit Cripple Creek on the way west, and then ride over Wolf Creek Pass. After we get to Albuquerque, we're thinking of riding south and doing some site seeing there. I'd kind of like to see Roswell. Our friends have to be home by the 11th, so our route back home is still unplanned. The weather looks good now, so we should have a great trip. Frank D.
-
Well its for sure the head gasket I pulled the head today and found a gasket that was in bad shape. The heads looked good and the cylinders look good. But I am wondering about the bearings the engine still sounded good but I have no idea of how long it had been drove this way. I did find that they had put stop leak in it so I am sure the PO new about this and thats why he traded it off, Is there a way to test the other head with out pulling it . Orlinhttp://0358/
-
Anyone have 2 of those small plastic caps that goes over the allen head screws that holds the right Fairing Cover onto the Faring.
-
OK your busted Miller47 shame on you for getting such a big head start on the Eureka Springs Meet & Eat and leaving us here to ride in the rain all by ourselves. Hey that scoot and trailer looked good going down the road. You two have a safe ride up and hopefully will see you there. Issac may be weakening some
-
What size are the chrome button head socket screws that hold the trunk brackets to the fender? Was leaving for work today and noticed the trunk was loose and one of the screws is missing.
-
Uh, Not my style http://i2.cdn.turner.com/cnn/dam/assets/120817080420-inflatable-helmet-story-top.jpg
-
My bike is burning coolant out the left pipe as you are sitting on the bike. I have not had a chance to determine which cylinder it is yet. Just a quick question for any one who may have seen this problem. Does the coolant circulate thru the head and jugs or just the jugs? Has any one had this problem with a second generation motor. I ride an 05 RSTD. Thanks in advance. kickshot
-
Can't leave until Monday morning but the bike is cleaned, trailer cleaned, tire pressures checked, I am ready to get on the road. Just got in from a little ride just around the countryside here. Only about 75 miles or so but it sure felt good. Had a hard time moving the bike at first. Cobwebs and etc. had it tied to the garage floor.
-
after riding yesterday my head lights worked this morning i went out lights would not com on any answers
