Jump to content

Bsintheair

Expired Membership
  • Posts

    8
  • Joined

  • Last visited

Posts posted by Bsintheair

  1. I have bought 2 of them. Fairly generic. The middle hole for the windshield is off center...finish is ehhh. It will need a good finish sanding and a paint job for sure. I put one on a 2005 RSTD and then one on a 96 RSTC. I had to make my own brackets, and buy a set of Tour Deluxe risers for the 96. It came out looking much better than the 2005. The Tour Deluxe model comes with brackets and slips right on.

  2. I have recently picked up a neglected 2005 RSTD. The carbs were leaking, so I took them off, cleaned up the seals, and looked for obvious signs of deterioration.

    Finding none, I replaced the float bowl gaskets and put back on bike. Started right up, then slowly died, and fuel began running out of the upper overflow tube. I removed them again, and went through the float valves, cleaning and checking them for leaks. Satisfied, I replaced the carbs, hooked up all wires, hoses, etc. and she started right up again. Only now I have gas coming out all over one carb (front right) even up to the upper boot. Before I order every damn part in the carbs, is there something ( a diaphragm or something) I am missing?

    P.S. I have owned and worked on 2nd Gen Royal Stars for 10 years, and on motorcycles for at least 25 years. While I cannot claim to be a mechanic, I do enjoy bringing dead and abused bikes back to life. If there is an easy fix, I would prefer that to separating the carbs!

×
×
  • Create New...